From: Clemens Ladisch Date: Tue, 13 May 2008 07:23:02 +0000 (+0200) Subject: [ALSA] virtuoso: add xonar_enable_output() X-Git-Tag: v2.6.27-rc1~1111^2~164 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=92215f3a178080bd9d7c65879499e9474e54d55c;p=linux-2.6-omap-h63xx.git [ALSA] virtuoso: add xonar_enable_output() Move the setting of the output enable GPIO bit to a separate function. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index e95dc5717ed..abd5313d19b 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -162,6 +162,14 @@ static void cs4362a_write(struct oxygen *chip, u8 reg, u8 value) oxygen_write_i2c(chip, I2C_DEVICE_CS4362A, reg, value); } +static void xonar_enable_output(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + msleep(data->anti_pop_delay); + oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); +} + static void xonar_common_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -173,13 +181,12 @@ static void xonar_common_init(struct oxygen *chip) data->has_power = !!(oxygen_read8(chip, data->ext_power_reg) & data->ext_power_bit); } - oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_CS53x1_M_MASK); + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_CS53x1_M_MASK | data->output_enable_bit); oxygen_write16_masked(chip, OXYGEN_GPIO_DATA, GPIO_CS53x1_M_SINGLE, GPIO_CS53x1_M_MASK); oxygen_ac97_set_bits(chip, 0, CM9780_JACK, CM9780_FMIC2MIC); - msleep(data->anti_pop_delay); - oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, data->output_enable_bit); - oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); + xonar_enable_output(chip); } static void update_pcm1796_volume(struct oxygen *chip)