From: Paul Mackerras Date: Wed, 8 Oct 2008 14:03:29 +0000 (+0000) Subject: powerpc: Sync RPA note in zImage with kernel's RPA note X-Git-Tag: v2.6.28-rc1~569^2~30 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=91a00302;p=linux-2.6-omap-h63xx.git powerpc: Sync RPA note in zImage with kernel's RPA note Commit 9b09c6d909dfd8de96b99b9b9c808b94b0a71614 ("powerpc: Change the default link address for pSeries zImage kernels") changed the real-base value in the CHRP note added by the addnote program from 12MB to 32MB to give more space for Open Firmware to load the zImage. (The real-base value says where we want OF to position itself in memory.) However, this change was ineffective on most pSeries machines, because the RPA note added by addnote has the "ignore me" flag set to 1. This was intended to tell OF to ignore just the RPA note, but has the side effect of also making OF ignore the CHRP note (at least on most pSeries machines). To solve this we have to set the "ignore me" flag to 0 in the RPA note. (We can't just omit the RPA note because that is equivalent to having an RPA note with default values, and the default values are not what we want.) However, then we have to make sure the values in the zImage's RPA note match up with the values that the kernel supplies later in prom_init.c with either the ibm,client-architecture-support call or the process-elf-header call in prom_send_capabilities(). So this sets the "ignore me" flag in the RPA note in addnote to 0, and adjusts the RPA note values in addnote.c and in prom_init.c to be consistent with each other and with the values in ibm_architecture_vec. However, since the wrapper is independent of the kernel, this doesn't ensure that the notes will stay consistent. To ensure that, this adds code to addnote.c so that it can extract the kernel's RPA note from the kernel binary and put that in the zImage. To that end, we put the kernel's fake ELF header (which contains the kernel's RPA note) into its own section, and arrange for wrapper to pull out that section with objcopy and pass it to addnote, which then extracts the RPA note from it and transfers it to the zImage. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index b1e5611b2ab..dcc9ab2ca82 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -11,7 +11,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Usage: addnote zImage + * Usage: addnote zImage [note.elf] + * + * If note.elf is supplied, it is the name of an ELF file that contains + * an RPA note to use instead of the built-in one. Alternatively, the + * note.elf file may be empty, in which case the built-in RPA note is + * used (this is to simplify how this is invoked from the wrapper script). */ #include #include @@ -43,27 +48,29 @@ char rpaname[] = "IBM,RPA-Client-Config"; */ #define N_RPA_DESCR 8 unsigned int rpanote[N_RPA_DESCR] = { - 0, /* lparaffinity */ - 64, /* min_rmo_size */ + 1, /* lparaffinity */ + 128, /* min_rmo_size */ 0, /* min_rmo_percent */ - 40, /* max_pft_size */ + 46, /* max_pft_size */ 1, /* splpar */ -1, /* min_load */ - 0, /* new_mem_def */ - 1, /* ignore_my_client_config */ + 1, /* new_mem_def */ + 0, /* ignore_my_client_config */ }; #define ROUNDUP(len) (((len) + 3) & ~3) unsigned char buf[512]; +unsigned char notebuf[512]; -#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) +#define GET_16BE(b, off) (((b)[off] << 8) + ((b)[(off)+1])) +#define GET_32BE(b, off) ((GET_16BE((b), (off)) << 16) + \ + GET_16BE((b), (off)+2)) -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) +#define PUT_16BE(b, off, v) ((b)[off] = ((v) >> 8) & 0xff, \ + (b)[(off) + 1] = (v) & 0xff) +#define PUT_32BE(b, off, v) (PUT_16BE((b), (off), (v) >> 16), \ + PUT_16BE((b), (off) + 2, (v))) /* Structure of an ELF file */ #define E_IDENT 0 /* ELF header */ @@ -88,15 +95,71 @@ unsigned char buf[512]; unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; +unsigned char *read_rpanote(const char *fname, int *nnp) +{ + int notefd, nr, i; + int ph, ps, np; + int note, notesize; + + notefd = open(fname, O_RDONLY); + if (notefd < 0) { + perror(fname); + exit(1); + } + nr = read(notefd, notebuf, sizeof(notebuf)); + if (nr < 0) { + perror("read note"); + exit(1); + } + if (nr == 0) /* empty file */ + return NULL; + if (nr < E_HSIZE || + memcmp(¬ebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 || + notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 || + notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB) + goto notelf; + close(notefd); + + /* now look for the RPA-note */ + ph = GET_32BE(notebuf, E_PHOFF); + ps = GET_16BE(notebuf, E_PHENTSIZE); + np = GET_16BE(notebuf, E_PHNUM); + if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) + goto notelf; + + for (i = 0; i < np; ++i, ph += ps) { + if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE) + continue; + note = GET_32BE(notebuf, ph + PH_OFFSET); + notesize = GET_32BE(notebuf, ph + PH_FILESZ); + if (notesize < 34 || note + notesize > nr) + continue; + if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 || + GET_32BE(notebuf, note + 8) != 0x12759999 || + strcmp((char *)¬ebuf[note + 12], rpaname) != 0) + continue; + /* looks like an RPA note, return it */ + *nnp = notesize; + return ¬ebuf[note]; + } + /* no RPA note found */ + return NULL; + + notelf: + fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname); + exit(1); +} + int main(int ac, char **av) { int fd, n, i; int ph, ps, np; int nnote, nnote2, ns; + unsigned char *rpap; - if (ac != 2) { - fprintf(stderr, "Usage: %s elf-file\n", av[0]); + if (ac != 2 && ac != 3) { + fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]); exit(1); } fd = open(av[1], O_RDWR); @@ -107,6 +170,7 @@ main(int ac, char **av) nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); + rpap = NULL; n = read(fd, buf, sizeof(buf)); if (n < 0) { @@ -124,16 +188,19 @@ main(int ac, char **av) exit(1); } - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); + if (ac == 3) + rpap = read_rpanote(av[2], &nnote2); + + ph = GET_32BE(buf, E_PHOFF); + ps = GET_16BE(buf, E_PHENTSIZE); + np = GET_16BE(buf, E_PHNUM); if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) goto notelf; if (ph + (np + 2) * ps + nnote + nnote2 > n) goto nospace; for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { + if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) { fprintf(stderr, "%s already has a note entry\n", av[1]); exit(0); @@ -148,37 +215,42 @@ main(int ac, char **av) /* fill in the program header entry */ ns = ph + 2 * ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); + PUT_32BE(buf, ph + PH_TYPE, PT_NOTE); + PUT_32BE(buf, ph + PH_OFFSET, ns); + PUT_32BE(buf, ph + PH_FILESZ, nnote); /* fill in the note area we point to */ /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); + PUT_32BE(buf, ns, strlen(arch) + 1); + PUT_32BE(buf, ns + 4, N_DESCR * 4); + PUT_32BE(buf, ns + 8, 0x1275); strcpy((char *) &buf[ns + 12], arch); ns += 12 + strlen(arch) + 1; for (i = 0; i < N_DESCR; ++i, ns += 4) - PUT_32BE(ns, descr[i]); + PUT_32BE(buf, ns, descr[i]); /* fill in the second program header entry and the RPA note area */ ph += ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote2); + PUT_32BE(buf, ph + PH_TYPE, PT_NOTE); + PUT_32BE(buf, ph + PH_OFFSET, ns); + PUT_32BE(buf, ph + PH_FILESZ, nnote2); /* fill in the note area we point to */ - PUT_32BE(ns, strlen(rpaname) + 1); - PUT_32BE(ns + 4, sizeof(rpanote)); - PUT_32BE(ns + 8, 0x12759999); - strcpy((char *) &buf[ns + 12], rpaname); - ns += 12 + ROUNDUP(strlen(rpaname) + 1); - for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) - PUT_32BE(ns, rpanote[i]); + if (rpap) { + /* RPA note supplied in file, just copy the whole thing over */ + memcpy(buf + ns, rpap, nnote2); + } else { + PUT_32BE(buf, ns, strlen(rpaname) + 1); + PUT_32BE(buf, ns + 4, sizeof(rpanote)); + PUT_32BE(buf, ns + 8, 0x12759999); + strcpy((char *) &buf[ns + 12], rpaname); + ns += 12 + ROUNDUP(strlen(rpaname) + 1); + for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) + PUT_32BE(buf, ns, rpanote[i]); + } /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 2); + PUT_16BE(buf, E_PHNUM, np + 2); /* write back */ lseek(fd, (long) 0, SEEK_SET); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 965c237c122..ee0dc41d7c5 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -307,7 +307,9 @@ fi # post-processing needed for some platforms case "$platform" in pseries|chrp) - $objbin/addnote "$ofile" + ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote + $objbin/addnote "$ofile" "$ofile".rpanote + rm -r "$ofile".rpanote ;; coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7cf274a2b33..2fdbc18ae94 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -732,7 +732,7 @@ static struct fake_elf { u32 ignore_me; } rpadesc; } rpanote; -} fake_elf = { +} fake_elf __section(.fakeelf) = { .elfhdr = { .e_ident = { 0x7f, 'E', 'L', 'F', ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, @@ -774,13 +774,13 @@ static struct fake_elf { .type = 0x12759999, .name = "IBM,RPA-Client-Config", .rpadesc = { - .lpar_affinity = 0, - .min_rmo_size = 64, /* in megabytes */ + .lpar_affinity = 1, + .min_rmo_size = 128, /* in megabytes */ .min_rmo_percent = 0, - .max_pft_size = 48, /* 2^48 bytes max PFT size */ + .max_pft_size = 46, /* 2^46 bytes max PFT size */ .splpar = 1, .min_load = ~0U, - .new_mem_def = 0 + .new_mem_def = 1 } } }; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index e6927fb2e65..b39c27ed791 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -203,6 +203,9 @@ SECTIONS *(.rela*) } + /* Fake ELF header containing RPA note; for addnote */ + .fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) } + /* freed after init ends here */ . = ALIGN(PAGE_SIZE); __init_end = .;