From: Alexey Starikovskiy Date: Thu, 27 Mar 2008 20:55:22 +0000 (+0300) Subject: x86: move generic_processor_info to apic_32.c X-Git-Tag: v2.6.26-rc1~1154^2~88 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=903dcb5a1bd0ef2b09d756f646e367cd12659b6f;p=linux-2.6-omap-h63xx.git x86: move generic_processor_info to apic_32.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 65036bbaf05..a99398f7123 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1469,6 +1469,88 @@ void disconnect_bsp_APIC(int virt_wire_setup) } } +unsigned int __cpuinitdata maxcpus = NR_CPUS; + +void __cpuinit generic_processor_info(int apicid, int version) +{ + int cpu; + cpumask_t tmp_map; + physid_mask_t phys_cpu; + + /* + * Validate version + */ + if (version == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); + version = 0x10; + } + apic_version[apicid] = version; + + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); + return; + } + + if (num_processors >= maxcpus) { + printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." + " Processor ignored.\n", maxcpus); + return; + } + + num_processors++; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + + if (apicid == boot_cpu_physical_apicid) + /* + * x86_bios_cpu_apicid is required to have processors listed + * in same order as logical cpu numbers. Hence the first + * entry is BSP, and so on. + */ + cpu = 0; + + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj + */ + if (num_processors > 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } +#ifdef CONFIG_SMP + /* are we being called early in kernel startup? */ + if (x86_cpu_to_apicid_early_ptr) { + u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; + u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + + cpu_to_apicid[cpu] = apicid; + bios_cpu_apicid[cpu] = apicid; + } else { + per_cpu(x86_cpu_to_apicid, cpu) = apicid; + per_cpu(x86_bios_cpu_apicid, cpu) = apicid; + } +#endif + cpu_set(cpu, cpu_possible_map); + cpu_set(cpu, cpu_present_map); +} + /* * Power management */ diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c index c79d6e06c3f..cd4522b3e90 100644 --- a/arch/x86/kernel/mpparse_32.c +++ b/arch/x86/kernel/mpparse_32.c @@ -35,7 +35,6 @@ /* Have we found an MP table */ int smp_found_config; -unsigned int __cpuinitdata maxcpus = NR_CPUS; /* * Various Linux-internal data structures created from the @@ -105,86 +104,6 @@ static int mpc_record; static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata; #endif -static void __cpuinit generic_processor_info(int apicid, int version) -{ - int cpu; - cpumask_t tmp_map; - physid_mask_t phys_cpu; - - /* - * Validate version - */ - if (version == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - version); - version = 0x10; - } - apic_version[apicid] = version; - - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - - num_processors++; - cpus_complement(tmp_map, cpu_present_map); - cpu = first_cpu(tmp_map); - - if (apicid == boot_cpu_physical_apicid) - /* - * x86_bios_cpu_apicid is required to have processors listed - * in same order as logical cpu numbers. Hence the first - * entry is BSP, and so on. - */ - cpu = 0; - - /* - * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y - * but we need to work other dependencies like SMP_SUSPEND etc - * before this can be done without some confusion. - * if (CPU_HOTPLUG_ENABLED || num_processors > 8) - * - Ashok Raj - */ - if (num_processors > 8) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (!APIC_XAPIC(version)) { - def_to_bigsmp = 0; - break; - } - /* If P4 and above fall through */ - case X86_VENDOR_AMD: - def_to_bigsmp = 1; - } - } -#ifdef CONFIG_SMP - /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; - - cpu_to_apicid[cpu] = apicid; - bios_cpu_apicid[cpu] = apicid; - } else { - per_cpu(x86_cpu_to_apicid, cpu) = apicid; - per_cpu(x86_bios_cpu_apicid, cpu) = apicid; - } -#endif - cpu_set(cpu, cpu_possible_map); - cpu_set(cpu, cpu_present_map); -} - static void __cpuinit MP_processor_info(struct mpc_config_processor *m) { int apicid; diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index eccbc581ec8..7ee54d396d6 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -43,6 +43,7 @@ extern unsigned long mp_lapic_addr; extern void find_smp_config(void); extern void get_smp_config(void); +void __cpuinit generic_processor_info(int apicid, int version); #ifdef CONFIG_ACPI extern void mp_register_lapic(u8 id, u8 enabled); extern void mp_register_lapic_address(u64 address);