From: Kumar Gala Date: Wed, 23 Nov 2005 18:43:15 +0000 (-0600) Subject: [PATCH] powerpc: Add support for building uImages X-Git-Tag: v2.6.16-rc1~666^2~112 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8c441a57d789e59ba9cc7f652a028b4a7e5471f7;p=linux-2.6-omap-h63xx.git [PATCH] powerpc: Add support for building uImages powerpc: Add support for building uImages Add support to build a kernel image bootable by u-boot. Most of the makefile foo is taken from arch/ppc/boot/images/Makefile Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a13eb575f83..5f80e58e5cb 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -151,7 +151,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc # All the instructions talk about "make bzImage". bzImage: zImage -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm +BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage .PHONY: $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9770f587af7..dfc7eacd9bd 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -143,6 +143,36 @@ $(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote @cp -f $< $@ $(call if_changed,addnote) +#----------------------------------------------------------- +# build u-boot images +#----------------------------------------------------------- +quiet_cmd_mygzip = GZIP $@ +cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ + +quiet_cmd_objbin = OBJCOPY $@ + cmd_objbin = $(OBJCOPY) -O binary $< $@ + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ + -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + +MKIMAGE := $(srctree)/scripts/mkuboot.sh +targets += uImage +extra-y += vmlinux.bin vmlinux.gz + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objbin) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,mygzip) + +$(obj)/uImage: $(obj)/vmlinux.gz + $(Q)rm -f $@ + $(call if_changed,uimage) + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi + install: $(CONFIGURE) $(BOOTIMAGE) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"