From: Robert Hancock Date: Fri, 9 Mar 2007 00:02:18 +0000 (-0600) Subject: sata_nv: revert use of notifiers for now X-Git-Tag: v2.6.21-rc4~73 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8ba5e4cbe444f10352756b6c7715bb26bb087680;p=linux-2.6-omap-h63xx.git sata_nv: revert use of notifiers for now Commit 721449bf0d51213fe3abf0ac3e3561ef9ea7827a added support for using the ADMA notifier bits to determine which commands to check for completion. However there have been reports that this causes command timeouts in certain cases. This is still being investigated. In addition, apparently the notifiers won't work if ADMA is disabled on the other port as a result of an ATAPI device being connected, and we don't handle this case properly. For now, just restore the previous behavior of checking all active commands to see if they are complete, without relying on the notifiers. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 388d07fab5f..9d9670a9b11 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -874,8 +874,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) if (status & (NV_ADMA_STAT_DONE | NV_ADMA_STAT_CPBERR)) { - u32 check_commands = notifier | notifier_error; + u32 check_commands; int pos, error = 0; + + if(ata_tag_valid(ap->active_tag)) + check_commands = 1 << ap->active_tag; + else + check_commands = ap->sactive; + /** Check CPBs for completed commands */ while ((pos = ffs(check_commands)) && !error) { pos--;