From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 2 Feb 2008 08:31:00 +0000 (+0800)
Subject: [Blackfin] arch: Enable UART2 and UART3 for bf548
X-Git-Tag: v2.6.25-rc1~33^2~4
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8b01eaff4fdf39d23d53288fd1a3e74fef136145;p=linux-2.6-omap-h63xx.git

[Blackfin] arch: Enable UART2 and UART3 for bf548

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index fa9debe8d5f..5453bc3664f 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -104,6 +104,16 @@ int request_dma(unsigned int channel, char *device_id)
 
 	mutex_unlock(&(dma_ch[channel].dmalock));
 
+#ifdef CONFIG_BF54x
+	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
+		strncmp(device_id, "BFIN_UART", 9) == 0)
+		dma_ch[channel].regs->peripheral_map |=
+			(channel - CH_UART2_RX + 0xC);
+	else
+		dma_ch[channel].regs->peripheral_map |=
+			(channel - CH_UART2_RX + 0x6);
+#endif
+
 	dma_ch[channel].device_id = device_id;
 	dma_ch[channel].irq_callback = NULL;
 
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index 4d97d3aa97c..46ff31f20ae 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -51,9 +51,13 @@
 #define CH_PIXC_OVERLAY		16
 #define CH_PIXC_OUTPUT		17
 #define CH_SPORT2_RX		18
+#define CH_UART2_RX		18
 #define CH_SPORT2_TX		19
+#define CH_UART2_TX		19
 #define CH_SPORT3_RX		20
+#define CH_UART3_RX		20
 #define CH_SPORT3_TX		21
+#define CH_UART3_TX		21
 #define CH_SDH			22
 #define CH_NFC			22
 #define CH_SPI2			23
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index c34507a3f1d..ad380d1f587 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -99,9 +99,13 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
 #define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
 #define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
 #define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
 #define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
 #define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
 #define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
 #define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
 #define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
@@ -421,9 +425,13 @@ Events         (highest priority)  EMU         0
 /* IAR4 BIT FILEDS */
 #define IRQ_CAN0_ERR_POS	0
 #define IRQ_SPORT2_RX_POS	4
+#define IRQ_UART2_RX_POS	4
 #define IRQ_SPORT2_TX_POS	8
+#define IRQ_UART2_TX_POS	8
 #define IRQ_SPORT3_RX_POS	12
+#define IRQ_UART3_RX_POS	12
 #define IRQ_SPORT3_TX_POS	16
+#define IRQ_UART3_TX_POS	16
 #define IRQ_EPPI1_POS		20
 #define IRQ_EPPI2_POS		24
 #define IRQ_SPI1_POS		28