From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 16 Jul 2008 18:33:38 +0000 (+0200)
Subject: ide-pmac: convert to use ide_timing_find_mode()
X-Git-Tag: v2.6.27-rc1~1049^2~55
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8a97206e31dc2e2f8f9b4d97e234b5c701fe9894;p=linux-2.6-omap-h63xx.git

ide-pmac: convert to use ide_timing_find_mode()

Also update my Copyrights while at it.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 5b91d23269d..cfa103a51b3 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -5,7 +5,7 @@
  * for doing DMA.
  *
  *  Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
- *  Copyright (C)      2007 Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -493,6 +493,7 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
 static void
 pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
+	struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
 	u32 *timings, t;
 	unsigned accessTicks, recTicks;
 	unsigned accessTime, recTime;
@@ -524,10 +525,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		}
 	case controller_kl_ata4:
 		/* 66Mhz cell */
-		recTime = cycle_time - ide_pio_timings[pio].active_time
-				- ide_pio_timings[pio].setup_time;
+		recTime = cycle_time - tim->active - tim->setup;
 		recTime = max(recTime, 150U);
-		accessTime = ide_pio_timings[pio].active_time;
+		accessTime = tim->active;
 		accessTime = max(accessTime, 150U);
 		accessTicks = SYSCLK_TICKS_66(accessTime);
 		accessTicks = min(accessTicks, 0x1fU);
@@ -540,10 +540,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	default: {
 		/* 33Mhz cell */
 		int ebit = 0;
-		recTime = cycle_time - ide_pio_timings[pio].active_time
-				- ide_pio_timings[pio].setup_time;
+		recTime = cycle_time - tim->active - tim->setup;
 		recTime = max(recTime, 150U);
-		accessTime = ide_pio_timings[pio].active_time;
+		accessTime = tim->active;
 		accessTime = max(accessTime, 150U);
 		accessTicks = SYSCLK_TICKS(accessTime);
 		accessTicks = min(accessTicks, 0x1fU);