From: Jarkko Lavinen Date: Fri, 28 Dec 2007 20:38:23 +0000 (-0400) Subject: MMC: OMAP: Do not busy wait for end of command for ever X-Git-Tag: v2.6.24-omap1~43 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8a001d30c6a0bbd4ab8cb38da2e519345c9f202c;p=linux-2.6-omap-h63xx.git MMC: OMAP: Do not busy wait for end of command for ever The limit was a fixed 100k limit in the busy loop, which is not accurate. It would better to have time limit for the worst case which occurs when sending 80 cycles at 400 kHz and takes about 200 microseconds, so limit the max time spend in the busy loop for some 250 microseconds. Signed-off-by: Jarkko Lavinen Signed-off-by: Tony Lindgren --- diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 47150a2716c..60e3fd70395 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1294,11 +1294,17 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) OMAP_MMC_WRITE(host, CON, dsor); slot->saved_con = dsor; if (ios->power_mode == MMC_POWER_ON) { + /* worst case at 400kHz, 80 cycles makes 200 microsecs */ + int usecs = 250; + /* Send clock cycles, poll completion */ OMAP_MMC_WRITE(host, IE, 0); OMAP_MMC_WRITE(host, STAT, 0xffff); OMAP_MMC_WRITE(host, CMD, 1 << 7); - while ((OMAP_MMC_READ(host, STAT) & 1) == 0); + while (usecs > 0 && (OMAP_MMC_READ(host, STAT) & 1) == 0) { + udelay(1); + usecs--; + } OMAP_MMC_WRITE(host, STAT, 1); }