From: Alan Stern Date: Mon, 28 Apr 2008 15:06:55 +0000 (-0400) Subject: USB: try to salvage lost power sessions X-Git-Tag: v2.6.27-rc1~946^2~89 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8808f00c7adfc8dc0b797c34ec03490b237fce4e;p=linux-2.6-omap-h63xx.git USB: try to salvage lost power sessions This patch (as1073) adds to khubd a way to recover from power-session interruption caused by transient connect-change or enable-change events. After the debouncing period, khubd attempts to do a USB-Persist-style reset or reset-resume. If it works, the connection will remain unscathed. The upshot is that we will be more immune to noise caused by EMI. The grace period is on the order of 100 ms, so this won't permit recovery from the "accidentally knocked the USB cable out of its socket" type of event, but it's a start. As an added bonus, if a device was suspended when the system goes to sleep then we no longer need to check for power-session interruptions when the system wakes up. Khubd will naturally see the status change while processing the device's parent hub and will do the right thing. The remote_wakeup() routine is changed; now it expects the caller to acquire the device lock rather than acquiring the lock itself. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index bf1585b203c..0a0e8cea0af 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1537,14 +1537,11 @@ static int usb_resume(struct device *dev) udev = to_usb_device(dev); /* If udev->skip_sys_resume is set then udev was already suspended - * when the system suspend started, so we don't want to resume - * udev during this system wakeup. However a reset-resume counts - * as a wakeup event, so allow a reset-resume to occur if remote - * wakeup is enabled. */ - if (udev->skip_sys_resume) { - if (!(udev->reset_resume && udev->do_remote_wakeup)) - return -EHOSTUNREACH; - } + * when the system sleep started, so we don't want to resume it + * during this system wakeup. + */ + if (udev->skip_sys_resume) + return 0; return usb_external_resume_device(udev); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 054a76dc5d5..8ea095e5909 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -690,18 +690,11 @@ static void hub_restart(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else if (udev->persist_enabled) { - /* Turn off the status changes to prevent khubd - * from disconnecting the device. - */ - if (portchange & USB_PORT_STAT_C_ENABLE) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_ENABLE); - if (portchange & USB_PORT_STAT_C_CONNECTION) - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_CONNECTION); #ifdef CONFIG_PM udev->reset_resume = 1; #endif + set_bit(port1, hub->change_bits); + } else { /* The power session is gone; tell khubd */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); @@ -2075,17 +2068,16 @@ int usb_port_resume(struct usb_device *udev) return status; } +/* caller has locked udev */ static int remote_wakeup(struct usb_device *udev) { int status = 0; - usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); usb_mark_last_busy(udev); status = usb_external_resume_device(udev); } - usb_unlock_device(udev); return status; } @@ -2632,6 +2624,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, struct usb_hcd *hcd = bus_to_hcd(hdev->bus); unsigned wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + struct usb_device *udev; int status, i; dev_dbg (hub_dev, @@ -2666,8 +2659,45 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } + /* Try to resuscitate an existing device */ + udev = hdev->children[port1-1]; + if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && + udev->state != USB_STATE_NOTATTACHED) { + + usb_lock_device(udev); + if (portstatus & USB_PORT_STAT_ENABLE) { + status = 0; /* Nothing to do */ + } else if (!udev->persist_enabled) { + status = -ENODEV; /* Mustn't resuscitate */ + +#ifdef CONFIG_USB_SUSPEND + } else if (udev->state == USB_STATE_SUSPENDED) { + /* For a suspended device, treat this as a + * remote wakeup event. + */ + if (udev->do_remote_wakeup) + status = remote_wakeup(udev); + + /* Otherwise leave it be; devices can't tell the + * difference between suspended and disabled. + */ + else + status = 0; +#endif + + } else { + status = usb_reset_composite_device(udev, NULL); + } + usb_unlock_device(udev); + + if (status == 0) { + clear_bit(port1, hub->change_bits); + return; + } + } + /* Disconnect any existing devices under this port */ - if (hdev->children[port1-1]) + if (udev) usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); @@ -2685,7 +2715,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } for (i = 0; i < SET_CONFIG_TRIES; i++) { - struct usb_device *udev; /* reallocate for each attempt, since references * to the previous one can escape in various ways @@ -2944,11 +2973,16 @@ static void hub_events(void) } if (portchange & USB_PORT_STAT_C_SUSPEND) { + struct usb_device *udev; + clear_port_feature(hdev, i, USB_PORT_FEAT_C_SUSPEND); - if (hdev->children[i-1]) { + udev = hdev->children[i-1]; + if (udev) { + usb_lock_device(udev); ret = remote_wakeup(hdev-> children[i-1]); + usb_unlock_device(udev); if (ret < 0) connect_change = 1; } else {