From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 26 Mar 2007 21:03:19 +0000 (+0200)
Subject: ide: fix locking for manual DMA enable/disable ("hdparm -d")
X-Git-Tag: v2.6.21-rc6~120^2~3
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8799620400b0b1a4729d8be828b5bfb3d2a8db1a;p=linux-2.6-omap-h63xx.git

ide: fix locking for manual DMA enable/disable ("hdparm -d")

Since hwif->ide_dma_check and hwif->ide_dma_on never queue any commands
(ide_config_drive_speed() sets transfer mode using polling and has no error
recovery) we are safe with setting hwgroup->busy for the time while DMA
setting for a drive is changed (so it won't race against I/O commands in fly).

I audited briefly all ->ide_dma_check/->ide_dma_on/->tuneproc/->speedproc
implementations and they all look OK wrt to this change.

This patch finally allowed me to close kernel bugzilla bug #8169
(once again thanks to Patrick Horn for reporting the issue & testing patches).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 695610f0e3e..a6f098fda88 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1124,17 +1124,40 @@ static int set_io_32bit(ide_drive_t *drive, int arg)
 static int set_using_dma (ide_drive_t *drive, int arg)
 {
 #ifdef CONFIG_BLK_DEV_IDEDMA
+	ide_hwif_t *hwif = drive->hwif;
+	int err = -EPERM;
+
 	if (!drive->id || !(drive->id->capability & 1))
-		return -EPERM;
-	if (HWIF(drive)->ide_dma_check == NULL)
-		return -EPERM;
+		goto out;
+
+	if (hwif->ide_dma_check == NULL)
+		goto out;
+
+	err = -EBUSY;
+	if (ide_spin_wait_hwgroup(drive))
+		goto out;
+	/*
+	 * set ->busy flag, unlock and let it ride
+	 */
+	hwif->hwgroup->busy = 1;
+	spin_unlock_irq(&ide_lock);
+
+	err = 0;
+
 	if (arg) {
-		if (ide_set_dma(drive))
-			return -EIO;
-		if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
+		if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
+			err = -EIO;
 	} else
 		ide_dma_off(drive);
-	return 0;
+
+	/*
+	 * lock, clear ->busy flag and unlock before leaving
+	 */
+	spin_lock_irq(&ide_lock);
+	hwif->hwgroup->busy = 0;
+	spin_unlock_irq(&ide_lock);
+out:
+	return err;
 #else
 	return -EPERM;
 #endif