From: Felix Fietkau Date: Sun, 5 Oct 2008 16:04:24 +0000 (+0200) Subject: mac80211: add multi-rate retry support X-Git-Tag: v2.6.28-rc1~717^2~110^2~6 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=870abdf67170daa9f1022e55a35c469239fcc74c;p=linux-2.6-omap-h63xx.git mac80211: add multi-rate retry support This patch adjusts the rate control API to allow multi-rate retry if supported by the driver. The ieee80211_hw struct specifies how many alternate rate selections the driver supports. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 3bf74e236ab..14c44df584d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4588,6 +4588,7 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_ADHOC); hw->queues = b43_modparam_qos ? 4 : 1; + hw->max_altrates = 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index e0749c0074c..2fabcf8f047 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -208,7 +208,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, txrate = ieee80211_get_tx_rate(dev->wl->hw, info); rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB; rate_ofdm = b43_is_ofdm_rate(rate); - fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : txrate; + fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate; rate_fb = fbrate->hw_value; rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 9fb1421cbec..c66d57560e7 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3710,6 +3710,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ + hw->max_altrates = 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index a894169411c..65e83378160 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -210,7 +210,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, rate = tx_rate->hw_value; rate_ofdm = b43legacy_is_ofdm_rate(rate); - rate_fb = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : tx_rate; + rate_fb = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : tx_rate; rate_fb_ofdm = b43legacy_is_ofdm_rate(rate_fb->hw_value); txhdr->mac_frame_ctl = wlhdr->frame_control; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index abcd641c54b..df7e78ee8a8 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -292,8 +292,8 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.alt_retry_rate_idx >= 0 ? - ieee80211_get_alt_retry_rate(dev, info)->bitrate << 4 : 0; + entry->flags2 = info->control.retries[0].rate_idx >= 0 ? + ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; entry->retry_limit = info->control.retry_limit; entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); @@ -855,6 +855,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, priv = dev->priv; priv->pdev = pdev; + dev->max_altrates = 1; SET_IEEE80211_DEV(dev, &pdev->dev); pci_set_drvdata(pdev, dev); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index feb3be81dfa..5617a1613c9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -292,6 +292,20 @@ enum mac80211_tx_control_flags { #define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) +/* maximum number of alternate rate retry stages */ +#define IEEE80211_TX_MAX_ALTRATE 3 + +/** + * struct ieee80211_tx_altrate - alternate rate selection/status + * + * @rate_idx: rate index to attempt to send with + * @limit: number of retries before fallback + */ +struct ieee80211_tx_altrate { + s8 rate_idx; + u8 limit; +}; + /** * struct ieee80211_tx_info - skb transmit information * @@ -335,12 +349,14 @@ struct ieee80211_tx_info { struct ieee80211_key_conf *hw_key; struct ieee80211_sta *sta; unsigned long jiffies; - s8 rts_cts_rate_idx, alt_retry_rate_idx; + s8 rts_cts_rate_idx; u8 retry_limit; + struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE]; } control; struct { u64 ampdu_ack_map; int ack_signal; + struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1]; u8 retry_count; bool excessive_retries; u8 ampdu_ack_len; @@ -828,6 +844,9 @@ enum ieee80211_hw_flags { * within &struct ieee80211_vif. * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. + * + * @max_altrates: maximum number of alternate rate retry stages + * @max_altrate_tries: maximum number of tries for each stage */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -844,6 +863,8 @@ struct ieee80211_hw { u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; + u8 max_altrates; + u8 max_altrate_tries; }; struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy); @@ -900,11 +921,11 @@ ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_info *c) + const struct ieee80211_tx_info *c, int idx) { - if (c->control.alt_retry_rate_idx < 0) + if (c->control.retries[idx].rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx]; } /** diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index d7153bbcdb2..1460537faf3 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -454,15 +454,16 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) if (unlikely(rsel.probe_idx >= 0)) { info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - info->control.alt_retry_rate_idx = tx->rate_idx; + info->control.retries[0].rate_idx = tx->rate_idx; + info->control.retries[0].limit = tx->local->hw.max_altrate_tries; tx->rate_idx = rsel.probe_idx; - } else - info->control.alt_retry_rate_idx = -1; + } else if (info->control.retries[0].limit == 0) + info->control.retries[0].rate_idx = -1; if (unlikely(tx->rate_idx < 0)) return TX_DROP; } else - info->control.alt_retry_rate_idx = -1; + info->control.retries[0].rate_idx = -1; if (tx->sdata->bss_conf.use_cts_prot && (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) { @@ -521,7 +522,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) * frames. * TODO: The last fragment could still use multiple retry * rates. */ - info->control.alt_retry_rate_idx = -1; + info->control.retries[0].rate_idx = -1; } /* Use CTS protection for unicast frames sent using extended rates if @@ -551,7 +552,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) int idx; /* Do not use multiple retry rates when using RTS/CTS */ - info->control.alt_retry_rate_idx = -1; + info->control.retries[0].rate_idx = -1; /* Use min(data rate, max base rate) as CTS/RTS rate */ rate = &sband->bitrates[tx->rate_idx];