From: Tejun Heo Date: Tue, 21 Oct 2008 05:26:39 +0000 (+0900) Subject: libata: transfer EHI control flags to slave ehc.i X-Git-Tag: v2.6.28-rc1~62^2~3 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=848e4c68c4695beae563f9a3d59fce596b466a74;p=linux-2.6-omap-h63xx.git libata: transfer EHI control flags to slave ehc.i ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used to control the behavior of EH. As only the master link is visible outside EH, these flags are set only for the master link although they should also apply to the slave link, which causes spurious EH messages during probe and suspend/resume. This patch transfers those two flags to slave ehc.i before performing slave autopsy and reporting. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a93247cc395..d2409a8acec 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2010,8 +2010,13 @@ void ata_eh_autopsy(struct ata_port *ap) struct ata_eh_context *mehc = &ap->link.eh_context; struct ata_eh_context *sehc = &ap->slave_link->eh_context; + /* transfer control flags from master to slave */ + sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK; + + /* perform autopsy on the slave link */ ata_eh_link_autopsy(ap->slave_link); + /* transfer actions from slave to master and clear slave */ ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS); mehc->i.action |= sehc->i.action; mehc->i.dev_action[1] |= sehc->i.dev_action[1]; diff --git a/include/linux/libata.h b/include/linux/libata.h index 947cf84e555..c261aa0584b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -340,6 +340,9 @@ enum { ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, + /* mask of flags to transfer *to* the slave link */ + ATA_EHI_TO_SLAVE_MASK = ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, + /* max tries if error condition is still set after ->error_handler */ ATA_EH_MAX_TRIES = 5,