From: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Date: Sat, 26 Aug 2006 02:35:31 +0000 (-0700)
Subject: wusb: pretty print new wireless USB devices when they connect
X-Git-Tag: v2.6.19-rc1~899^2~52
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=83a07196735dbf371b61d6dffbb7e6a696c633c2;p=linux-2.6-omap-h63xx.git

wusb: pretty print new wireless USB devices when they connect

New code being pushed to linuxuwb.org requires this patch to connect
WUSB devices.

Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1bd5ee26f0e..65720f2bffc 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2028,6 +2028,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	int			i, j, retval;
 	unsigned		delay = HUB_SHORT_RESET_TIME;
 	enum usb_device_speed	oldspeed = udev->speed;
+	char 			*speed, *type;
 
 	/* root hub ports have a slightly longer reset period
 	 * (from USB 2.0 spec, section 7.1.7.5)
@@ -2084,17 +2085,21 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
  
+	type = "";
+	switch (udev->speed) {
+	case USB_SPEED_LOW:	speed = "low";	break;
+	case USB_SPEED_FULL:	speed = "full";	break;
+	case USB_SPEED_HIGH:	speed = "high";	break;
+	case USB_SPEED_VARIABLE:
+				speed = "variable";
+				type = "Wireless ";
+				break;
+	default: 		speed = "?";	break;
+	}
 	dev_info (&udev->dev,
-			"%s %s speed USB device using %s and address %d\n",
-			(udev->config) ? "reset" : "new",
-			({ char *speed; switch (udev->speed) {
-			case USB_SPEED_LOW:	speed = "low";	break;
-			case USB_SPEED_FULL:	speed = "full";	break;
-			case USB_SPEED_HIGH:	speed = "high";	break;
-			default: 		speed = "?";	break;
-			}; speed;}),
-			udev->bus->controller->driver->name,
-			udev->devnum);
+		  "%s %s speed %sUSB device using %s and address %d\n",
+		  (udev->config) ? "reset" : "new", speed, type,
+		  udev->bus->controller->driver->name, udev->devnum);
 
 	/* Set up TT records, if needed  */
 	if (hdev->tt) {