From: Ivo van Doorn Date: Sat, 1 Nov 2008 23:37:25 +0000 (+0100) Subject: rt2x00: Block set_key() during suspend/shutdown X-Git-Tag: v2.6.29-rc1~581^2~580^2~43 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=8058409c4fb8e38632207d572ed29943d2585520;p=linux-2.6-omap-h63xx.git rt2x00: Block set_key() during suspend/shutdown mac80211 will call set_key() when the device is shutting down. When the device is unplugged the keys will be lost automatically due to the power loss. When the device is not plugged but the module is only unloaded the keys can remain in the device hardware, when the module is loaded the keys will be cleaned up during initialization. This should prevent the problem reported by Johannes Berg, where unplugging the device while suspended resulted in a NULL pointer error during set_key() which was caused because of the CSR base address being freed. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 8fc2315c596..188f89177bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -486,7 +486,9 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, struct ieee80211_key_conf *key); struct rt2x00lib_crypto crypto; - if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + else if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) return -EOPNOTSUPP; else if (key->keylen > 32) return -ENOSPC;