From: Mark A. Greer Date: Tue, 5 Feb 2008 06:27:54 +0000 (-0800) Subject: serial: MPSC: set baudrate when BRG divider is set. X-Git-Tag: v2.6.25-rc1~1018 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=7bbdc3d51cf793dd81c38f794f4cb73df58d1527;p=linux-2.6-omap-h63xx.git serial: MPSC: set baudrate when BRG divider is set. The clock to generate the desired baudrate with the MPSC is first divided by the Baud Rate Generator (BRG) and then by the MPSC itself. So, when the BRG divider is changed, the MPSC divider must also be changed to generate the correct baudrate. During MPSC initialization, the BRG divider is changed but the MPSC divider isn't changed until much later. This results in some printk's coming out garbled. To fix that, set the MPSC divider at the same time that the BRG divider is changed. Signed-off-by: Mark A. Greer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 4d643c92665..cb3a9196774 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -612,6 +612,7 @@ static void mpsc_hw_init(struct mpsc_port_info *pi) /* No preamble, 16x divider, low-latency, */ writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + mpsc_set_baudrate(pi, pi->default_baud); if (pi->mirror_regs) { pi->MPSC_CHR_1_m = 0;