From: Bartlomiej Zolnierkiewicz Date: Sat, 26 Jan 2008 19:12:59 +0000 (+0100) Subject: serverworks: cleanup ->set_dma_mode method X-Git-Tag: v2.6.25-rc1~1227^2~60 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=7b971df185807ceb358471e16ce8754ccfcc7de9;p=linux-2.6-omap-h63xx.git serverworks: cleanup ->set_dma_mode method IDE core guarantees that ->set_dma_mode will be called only for DMA modes set in SWDMA/MWDMA/UDMA masks. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index e9bd269547b..877c09bf482 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -164,25 +164,12 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); - switch(speed) { - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; - break; - - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - dma_timing |= dma_modes[2]; - ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit)); - ultra_enable |= (0x01 << drive->dn); - default: - break; - } + if (speed >= XFER_UDMA_0) { + dma_timing |= dma_modes[2]; + ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit)); + ultra_enable |= (0x01 << drive->dn); + } else if (speed >= XFER_MW_DMA_0) + dma_timing |= dma_modes[speed - XFER_MW_DMA_0]; pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing); pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);