From: Anton Blanchard Date: Thu, 2 Jun 2005 21:02:02 +0000 (-0700) Subject: [PATCH] ppc64: cleanup SPR definitions X-Git-Tag: v2.6.12-rc6~27 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=79f1248962cfa1e11a5610e0349bc3515687516d;p=linux-2.6-omap-h63xx.git [PATCH] ppc64: cleanup SPR definitions There are a bunch of irrelevant SPR definitions in asm/processer.h. Cut them down a bit, also add a DABR_TRANSLATION define which will be used shortly. Signed-off-by: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h index 0035efe2db2..5ba6aa45e1e 100644 --- a/include/asm-ppc64/processor.h +++ b/include/asm-ppc64/processor.h @@ -120,103 +120,18 @@ /* Special Purpose Registers (SPRNs)*/ -#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ +#define DABR_TRANSLATION (1UL << 2) #define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ -#define DBCR_EDM 0x80000000 -#define DBCR_IDM 0x40000000 -#define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 -#define DBCR_RST_SYSTEM 3 -#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */ -#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */ -#define DBCR_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ -#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ -#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ -#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ -#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ -#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ -#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ -#define DAC_BYTE 0 -#define DAC_HALF 1 -#define DAC_WORD 2 -#define DAC_QUAD 3 -#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ -#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ -#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ -#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ -#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ -#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ -#define DBCR_SIA 0x00000008 /* Second IAC Enable */ -#define DBCR_SDA 0x00000004 /* Second DAC Enable */ -#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ -#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ -#define DCCR_NOCACHE 0 /* Noncacheable */ -#define DCCR_CACHE 1 /* Cacheable */ -#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ -#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ -#define DCWR_COPY 0 /* Copy-back */ -#define DCWR_WRITE 1 /* Write-through */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ #define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define DSISR_NOHPTE 0x40000000 /* no translation found */ #define DSISR_PROTFAULT 0x08000000 /* protection fault */ #define DSISR_ISSTORE 0x02000000 /* access was a store */ #define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ #define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ -#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ -#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ -#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ -#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ -#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */ -#define ESR_PTR 0x02000000 /* Program Exception - Trap */ -#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ -#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ -#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ #define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ #define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */ #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ @@ -225,23 +140,8 @@ #define SPRN_HID5 0x3F6 /* 970 HID5 */ #define SPRN_TSC 0x3FD /* Thread switch control */ #define SPRN_TST 0x3FC /* Thread switch timeout */ -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ -#define ICCR_NOCACHE 0 /* Noncacheable */ -#define ICCR_CACHE 1 /* Cacheable */ -#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ -#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ -#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ -#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ -#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ -#define SPRN_PID 0x3B1 /* Process ID */ #define SPRN_PIR 0x3FF /* Processor Identification Register */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */ @@ -249,9 +149,6 @@ #define SPRN_RPA 0x3D6 /* Required Physical Address Register */ #define SPRN_SDA 0x3BF /* Sampled Data Address Register */ #define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ -#define SGR_NORMAL 0 -#define SGR_GUARDED 1 #define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ #define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ @@ -264,49 +161,8 @@ #define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */ #define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */ #define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -#define WP_2_17 0 /* 2^17 clocks */ -#define WP_2_21 1 /* 2^21 clocks */ -#define WP_2_25 2 /* 2^25 clocks */ -#define WP_2_29 3 /* 2^29 clocks */ -#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ -#define WRC_NONE 0 /* No reset will occur */ -#define WRC_CORE 1 /* Core reset will occur */ -#define WRC_CHIP 2 /* Chip reset will occur */ -#define WRC_SYSTEM 3 /* System reset will occur */ -#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ -#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ -#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ -#define FP_2_9 0 /* 2^9 clocks */ -#define FP_2_13 1 /* 2^13 clocks */ -#define FP_2_17 2 /* 2^17 clocks */ -#define FP_2_21 3 /* 2^21 clocks */ -#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ -#define TCR_ARE 0x00400000 /* Auto Reload Enable */ -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -#define THRM1_TIN (1<<0) -#define THRM1_TIV (1<<1) -#define THRM1_THRES (0x7f<<2) -#define THRM1_TID (1<<29) -#define THRM1_TIE (1<<30) -#define THRM1_V (1<<31) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<31) -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ -#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ -#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ -#define WRS_NONE 0 /* No WDT reset occurred */ -#define WRS_CORE 1 /* WDT forced core reset */ -#define WRS_CHIP 2 /* WDT forced chip reset */ -#define WRS_SYSTEM 3 /* WDT forced system reset */ -#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ -#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ #define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ #define SPRN_XER 0x001 /* Fixed Point Exception Register */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register */ #define SPRN_VRSAVE 0x100 /* Vector save */ /* Performance monitor SPRs */ @@ -352,28 +208,19 @@ #define CTR SPRN_CTR /* Counter Register */ #define DAR SPRN_DAR /* Data Address Register */ #define DABR SPRN_DABR /* Data Address Breakpoint Register */ -#define DCMP SPRN_DCMP /* Data TLB Compare Register */ #define DEC SPRN_DEC /* Decrement Register */ -#define DMISS SPRN_DMISS /* Data TLB Miss Register */ #define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */ -#define EAR SPRN_EAR /* External Address Register */ -#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */ -#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */ #define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */ #define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */ #define NIADORM SPRN_NIADORM /* NIA Dormant Register */ #define TSC SPRN_TSC /* Thread switch control */ #define TST SPRN_TST /* Thread switch timeout */ #define IABR SPRN_IABR /* Instruction Address Breakpoint Register */ -#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */ -#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */ -#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */ #define L2CR SPRN_L2CR /* PPC 750 L2 control register */ #define __LR SPRN_LR #define PVR SPRN_PVR /* Processor Version */ #define PIR SPRN_PIR /* Processor ID */ #define PURR SPRN_PURR /* Processor Utilization of Resource Register */ -//#define RPA SPRN_RPA /* Required Physical Address Register */ #define SDR1 SPRN_SDR1 /* MMU hash base register */ #define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */ #define SPR1 SPRN_SPRG1 @@ -389,10 +236,6 @@ #define TBRU SPRN_TBRU /* Time Base Read Upper Register */ #define TBWL SPRN_TBWL /* Time Base Write Lower Register */ #define TBWU SPRN_TBWU /* Time Base Write Upper Register */ -#define ICTC 1019 -#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */ -#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */ -#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */ #define XER SPRN_XER /* Processor Version Register (PVR) field extraction */