From: Chris Pascoe Date: Mon, 19 Nov 2007 06:47:07 +0000 (-0300) Subject: V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculation X-Git-Tag: v2.6.24-rc6~93 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=78f3b0b672c79df9ffa55399a7d6fc4b173e9b4b;p=linux-2.6-omap-h63xx.git V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculation The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index a97a7fd2c89..0106df4c55e 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -122,7 +122,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, enum fe_bandwidth bandwidth, u16 *nominal_rate) { - u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */ + u32 adc_clock = 45056; /* 45.056 MHz */ u8 bw; struct zl10353_state *state = fe->demodulator_priv; @@ -142,7 +142,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, break; } - *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4; + *nominal_rate = (bw * (1 << 23) / 7 * 125 + adc_clock / 2) / adc_clock; dprintk("%s: bw %d, adc_clock %d => 0x%x\n", __FUNCTION__, bw, adc_clock, *nominal_rate); diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index cb274dc12b8..1c3d494a6da 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -30,7 +30,7 @@ struct zl10353_config u8 demod_address; /* frequencies in kHz */ - int adc_clock; // default: 22528 + int adc_clock; /* default: 45056 */ /* set if no pll is connected to the secondary i2c bus */ int no_tuner;