From: Jean Delvare Date: Wed, 7 Jan 2009 15:37:35 +0000 (+0100) Subject: hwmon: Fix various typos X-Git-Tag: v2.6.29-rc1~190^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=77fa49d94a75b5f9702c70b4fbe27b08b21317b9;p=linux-2.6-omap-h63xx.git hwmon: Fix various typos Signed-off-by: Jean Delvare Acked-by: Hans de Goede Acked-by: David Hubbard --- diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 40062074129..a13680871bc 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -164,7 +164,7 @@ configured individually according to the following options. temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 88e71f195ec..95a99c590da 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1386,7 +1386,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); } - /* Check if temperature channnels are reset manually or by some reason */ + /* Check if temperature channels are reset manually or by some reason */ tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { /* Temp1,Temp3=thermistor; Temp2=thermal diode */ diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index a3a01dc35a3..cb808d01536 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -503,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } for (i = 0; i < 4; i++) { - /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i != 1) { pwmcfg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[i]);