From: Michael Reed Date: Thu, 20 Mar 2008 22:32:05 +0000 (-0500) Subject: [SCSI] mptsas: do not use ioc->handle to locate hba portinfo structure X-Git-Tag: v2.6.26-rc1~1140^2~89 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=7748369f49d428e558c519ed344d3005d38347b7;p=linux-2.6-omap-h63xx.git [SCSI] mptsas: do not use ioc->handle to locate hba portinfo structure While performing hardware raid reset testing via the raid's client, I noticed that sometimes, following the reset, that there would be more raid targets in the lsscsi output than there actually were raid targets. I tracked this down to the following issue. Fusion cannot always find the mptsas_portinfo structure for the hba because it uses the handle stored in ioc->handle to locate it. The problem is that the firmware can change the handle associated with the hba when h/w raid is reset (via the raid client). When this happens, the driver will allocate another mptsas_portinfo structure and link it into the chain of said structures. This ultimately causes confusion within the driver resulting in targets not being removed when they should be. Eric Moore pointed out that the hba's portinfo structure is always the first structure on the sas_topology list. This patch modifies mptsas.c to access the hba's portinfo structure by taking the first structure on said list. Signed-off-by: Michael Reed Acked-by: "Moore, Eric" Signed-off-by: James Bottomley --- diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 0041ab3e5e8..a8f617447d2 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -695,7 +695,6 @@ typedef struct _MPT_ADAPTER struct mutex sas_discovery_mutex; u8 sas_discovery_runtime; u8 sas_discovery_ignore_events; - u16 handle; int sas_index; /* index refrencing */ MPT_SAS_MGMT sas_mgmt; struct work_struct sas_persist_task; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 78734e25edd..468480771f1 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -230,6 +230,20 @@ static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy) return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; } +static struct mptsas_portinfo * +mptsas_get_hba_portinfo(MPT_ADAPTER *ioc) +{ + struct list_head *head = &ioc->sas_topology; + struct mptsas_portinfo *pi = NULL; + + /* always the first entry on sas_topology list */ + + if (!list_empty(head)) + pi = list_entry(head->next, struct mptsas_portinfo, list); + + return pi; +} + /* * mptsas_find_portinfo_by_handle * @@ -1290,7 +1304,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, struct mptsas_portinfo *port_info; mutex_lock(&ioc->sas_topology_mutex); - port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle); + port_info = mptsas_get_hba_portinfo(ioc); if (port_info && port_info->phy_info) sas_address = port_info->phy_info[0].phy->identify.sas_address; @@ -2028,8 +2042,7 @@ static int mptsas_probe_one_phy(struct device *dev, int i; mutex_lock(&ioc->sas_topology_mutex); - port_info = mptsas_find_portinfo_by_handle(ioc, - ioc->handle); + port_info = mptsas_get_hba_portinfo(ioc); mutex_unlock(&ioc->sas_topology_mutex); for (i = 0; i < port_info->num_phys; i++) @@ -2099,8 +2112,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc) mptsas_sas_io_unit_pg1(ioc); mutex_lock(&ioc->sas_topology_mutex); - ioc->handle = hba->phy_info[0].handle; - port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle); + port_info = mptsas_get_hba_portinfo(ioc); if (!port_info) { port_info = hba; list_add_tail(&port_info->list, &ioc->sas_topology);