From: Wang Jian Date: Wed, 16 Jul 2008 13:46:20 +0000 (+0800) Subject: net/phy: Fix 88e1111 copper/fiber selection in RGMII mode X-Git-Tag: v2.6.27-rc1~860^2~3^2~32 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=7239016d52c6d568d069f083bdcd17f35ab79fd8;p=linux-2.6-omap-h63xx.git net/phy: Fix 88e1111 copper/fiber selection in RGMII mode MII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not MII_M1111_PHY_EXT_CR. Signed-off-by: Wang Jian Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 737512c0097..4aa54794704 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -158,7 +158,6 @@ static int m88e1111_config_init(struct phy_device *phydev) { int err; int temp; - int mode; /* Enable Fiber/Copper auto selection */ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); @@ -198,9 +197,7 @@ static int m88e1111_config_init(struct phy_device *phydev) temp &= ~(MII_M1111_HWCFG_MODE_MASK); - mode = phy_read(phydev, MII_M1111_PHY_EXT_CR); - - if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES) + if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES) temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII; else temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;