From: Jean Delvare Date: Tue, 23 Oct 2007 12:02:24 +0000 (+0200) Subject: hwmon: (gl518sm) Fix the reported fan speed X-Git-Tag: v2.6.25-rc1~281^2~43 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=72240307e988627df46553846936aa89a0f6a283;p=linux-2.6-omap-h63xx.git hwmon: (gl518sm) Fix the reported fan speed The fan speeds reported by the gl518sm driver are twice as much as they should. It's currently reporting the number of pulses per minute, not rotations per minute, while typical fans emit two pulses per rotation. This explains why all reports with this driver had very high speed values (between 9000 to 12000 RPM). Odd that nobody ever actually complained about this bug. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index c5255118bc1..3b1ac48fce2 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -96,10 +96,10 @@ static inline u8 FAN_TO_REG(long rpm, int div) long rpmdiv; if (rpm == 0) return 0; - rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div; - return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255); + rpmdiv = SENSORS_LIMIT(rpm, 1, 960000) * div; + return SENSORS_LIMIT((480000 + rpmdiv / 2) / rpmdiv, 1, 255); } -#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div)))) +#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val)*(div)))) #define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) #define IN_FROM_REG(val) ((val)*19)