From: David Brownell Date: Fri, 4 Jul 2008 16:59:37 +0000 (-0700) Subject: gpio: pca953x (i2c) handles max7310 too X-Git-Tag: v2.6.26-rc9~42 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=7059d4b08eba2ad046395a04b02e34ca27304d8f;p=linux-2.6-omap-h63xx.git gpio: pca953x (i2c) handles max7310 too The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bbd28342e77..008c38ba774 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -28,12 +28,18 @@ config DEBUG_GPIO comment "I2C GPIO expanders:" config GPIO_PCA953X - tristate "PCA953x I/O ports" + tristate "PCA953x, PCA955x, and MAX7310 I/O ports" depends on I2C help - Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit), - PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539 - (16-bit) I/O ports. These parts are made by NXP and TI. + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, pca9534, pca9538, pca9554, pca9557 + + 16 bits: pca9535, pca9539, pca9555 This driver can also be built as a module. If so, the module will be called pca953x. diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 7e40e8a55ed..a380730b61a 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -33,7 +33,7 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, - /* REVISIT several pca955x parts should work here too */ + { "max7310", 8, }, { } }; MODULE_DEVICE_TABLE(i2c, pca953x_id);