From: Matt Waddel Date: Fri, 15 Feb 2008 03:31:27 +0000 (-0800) Subject: m68knommu: fix profile timer X-Git-Tag: v2.6.25-rc2~36 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6ef1e56776aad1fe7381b5bc64e39ff80aa33899;p=linux-2.6-omap-h63xx.git m68knommu: fix profile timer I was looking at timers in the Coldfire system and I noticed that the CONFIG_HIGHPROFILE option seems to be a little out of date. Signed-off-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index a60213e877e..ba5a9f32ebd 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -148,25 +148,32 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy) /* Reset ColdFire timer2 */ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER)); if (current->pid) - profile_tick(CPU_PROFILING, regs); + profile_tick(CPU_PROFILING); return IRQ_HANDLED; } /***************************************************************************/ +static struct irqaction coldfire_profile_irq = { + .name = "profile timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = coldfire_profile_tick, +}; + void coldfire_profile_init(void) { - printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ); + printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", + PROFILEHZ); + + setup_irq(mcf_profilevector, &coldfire_profile_irq); /* Set up TIMER 2 as high speed profile clock */ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR)); - __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); + __raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR)); - request_irq(mcf_profilevector, coldfire_profile_tick, - (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL); mcf_settimericr(2, 7); }