From: David Brownell Date: Fri, 16 Feb 2007 02:50:01 +0000 (-0800) Subject: usbnet: recognize SiteCom CN-124 X-Git-Tag: v2.6.21-rc1~82^2~6 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6e91f527cd0644530894ee3bfb06d209d3c8c54a;p=linux-2.6-omap-h63xx.git usbnet: recognize SiteCom CN-124 Add Sitecom CN-124 device IDs to ALI M5632 usb host-to-host cable; device IDs from Francois Barre Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index ae8fb06cf38..6e3fead26ce 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -79,13 +79,19 @@ static int always_connected (struct usbnet *dev) * * ALi M5632 driver ... does high speed * + * NOTE that the MS-Windows drivers for this chip use some funky and + * (naturally) undocumented 7-byte prefix to each packet, so this is a + * case where we don't currently interoperate. Also, once you unplug + * one end of the cable, you need to replug the other end too ... since + * chip docs are unavailable, there's no way to reset the relevant state + * short of a power cycle. + * *-------------------------------------------------------------------------*/ static const struct driver_info ali_m5632_info = { .description = "ALi M5632", }; - #endif @@ -223,6 +229,10 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x0402, 0x5632), // ALi defaults .driver_info = (unsigned long) &ali_m5632_info, }, +{ + USB_DEVICE (0x182d,0x207c), // SiteCom CN-124 + .driver_info = (unsigned long) &ali_m5632_info, +}, #endif #ifdef CONFIG_USB_AN2720 @@ -314,13 +324,13 @@ static struct usb_driver cdc_subset_driver = { static int __init cdc_subset_init(void) { - return usb_register(&cdc_subset_driver); + return usb_register(&cdc_subset_driver); } module_init(cdc_subset_init); static void __exit cdc_subset_exit(void) { - usb_deregister(&cdc_subset_driver); + usb_deregister(&cdc_subset_driver); } module_exit(cdc_subset_exit);