From: Anton Vorontsov Date: Tue, 29 Apr 2008 20:57:38 +0000 (+0200) Subject: alim15x3: disable init_hwif_ali15x3 for PowerPC X-Git-Tag: v2.6.26-rc1~355^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6d1cee44361b8d06ccd1812e80448d86ae60dfe3;p=linux-2.6-omap-h63xx.git alim15x3: disable init_hwif_ali15x3 for PowerPC We don't need init_hwif_ali15x3() on the PowerPC systems either. Before: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0: Disabled unable to get IRQ 14. ide0: failed to initialize IDE interface ide1: Disabled unable to get IRQ 15. ide1: failed to initialize IDE interface After: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0 at 0x1100-0x1107,0x110a on irq 19 ide1 at 0x1110-0x1117,0x111a on irq 19 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide0 works well, though I can't test ide1, it isn't traced out on the board. Signed-off-by: Anton Vorontsov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index b36a22b8c21..c1922f9cfe8 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -412,14 +412,14 @@ static u8 __devinit ali_cable_detect(ide_hwif_t *hwif) return cbl; } -#ifndef CONFIG_SPARC64 +#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure * * Obtain the IRQ tables for an ALi based IDE solution on the PC * class platforms. This part of the code isn't applicable to the - * Sparc systems + * Sparc and PowerPC systems. */ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) @@ -463,7 +463,9 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) hwif->irq = irq; } } -#endif +#else +#define init_hwif_ali15x3 NULL +#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ /** * init_dma_ali15x3 - set up DMA on ALi15x3 @@ -517,9 +519,7 @@ static const struct ide_dma_ops ali_dma_ops = { static const struct ide_port_info ali15x3_chipset __devinitdata = { .name = "ALI15X3", .init_chipset = init_chipset_ali15x3, -#ifndef CONFIG_SPARC64 .init_hwif = init_hwif_ali15x3, -#endif .init_dma = init_dma_ali15x3, .port_ops = &ali_port_ops, .pio_mask = ATA_PIO5,