From: H. Peter Anvin Date: Wed, 30 Jan 2008 12:30:30 +0000 (+0100) Subject: x86: actually merge X-Git-Tag: v2.6.25-rc1~1143^2~791 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6b59257082e136fbbce1aa017575a451c0df0592;p=linux-2.6-omap-h63xx.git x86: actually merge This actually merges into . Signed-off-by: H. Peter Anvin Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h index 9eef6a32a13..d8bacf3c4b0 100644 --- a/include/asm-x86/alternative.h +++ b/include/asm-x86/alternative.h @@ -1,5 +1,161 @@ -#ifdef CONFIG_X86_32 -# include "alternative_32.h" +#ifndef _ASM_X86_ALTERNATIVE_H +#define _ASM_X86_ALTERNATIVE_H + +#include +#include +#include + +/* + * Alternative inline assembly for SMP. + * + * The LOCK_PREFIX macro defined here replaces the LOCK and + * LOCK_PREFIX macros used everywhere in the source tree. + * + * SMP alternatives use the same data structures as the other + * alternatives and the X86_FEATURE_UP flag to indicate the case of a + * UP system running a SMP kernel. The existing apply_alternatives() + * works fine for patching a SMP kernel for UP. + * + * The SMP alternative tables can be kept after boot and contain both + * UP and SMP versions of the instructions to allow switching back to + * SMP at runtime, when hotplugging in a new CPU, which is especially + * useful in virtualized environments. + * + * The very common lock prefix is handled as special case in a + * separate table which is a pure address list without replacement ptr + * and size information. That keeps the table sizes small. + */ + +#ifdef CONFIG_SMP +#define LOCK_PREFIX \ + ".section .smp_locks,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR "661f\n" /* address */ \ + ".previous\n" \ + "661:\n\tlock; " + +#else /* ! CONFIG_SMP */ +#define LOCK_PREFIX "" +#endif + +/* This must be included *after* the definition of LOCK_PREFIX */ +#include + +struct alt_instr { + u8 *instr; /* original instruction */ + u8 *replacement; + u8 cpuid; /* cpuid bit set for replacement */ + u8 instrlen; /* length of original instruction */ + u8 replacementlen; /* length of new instruction, <= instrlen */ + u8 pad1; +#ifdef CONFIG_X86_64 + u32 pad2; +#endif +}; + +extern void alternative_instructions(void); +extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end); + +struct module; + +#ifdef CONFIG_SMP +extern void alternatives_smp_module_add(struct module *mod, char *name, + void *locks, void *locks_end, + void *text, void *text_end); +extern void alternatives_smp_module_del(struct module *mod); +extern void alternatives_smp_switch(int smp); +#else +static inline void alternatives_smp_module_add(struct module *mod, char *name, + void *locks, void *locks_end, + void *text, void *text_end) {} +static inline void alternatives_smp_module_del(struct module *mod) {} +static inline void alternatives_smp_switch(int smp) {} +#endif /* CONFIG_SMP */ + +/* + * Alternative instructions for different CPU types or capabilities. + * + * This allows to use optimized instructions even on generic binary + * kernels. + * + * length of oldinstr must be longer or equal the length of newinstr + * It can be padded with nops as needed. + * + * For non barrier like inlines please define new variants + * without volatile and memory clobber. + */ +#define alternative(oldinstr, newinstr, feature) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR "661b\n" /* label */ \ + _ASM_PTR "663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature) : "memory") + +/* + * Alternative inline assembly with input. + * + * Pecularities: + * No memory clobber here. + * Argument numbers start with 1. + * Best is to use constraints that are fixed size (like (%1) ... "r") + * If you use variable sized constraints like "m" or "g" in the + * replacement make sure to pad to the worst case length. + */ +#define alternative_input(oldinstr, newinstr, feature, input...) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR "661b\n" /* label */ \ + _ASM_PTR "663f\n" /* new instruction */ \ + " .byte %c0\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" :: "i" (feature), ##input) + +/* Like alternative_input, but with a single output argument */ +#define alternative_io(oldinstr, newinstr, feature, output, input...) \ + asm volatile ("661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR "661b\n" /* label */ \ + _ASM_PTR "663f\n" /* new instruction */ \ + " .byte %c[feat]\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement,\"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" : output : [feat] "i" (feature), ##input) + +/* + * use this macro(s) if you need more than one output parameter + * in alternative_io + */ +#define ASM_OUTPUT2(a, b) a, b + +struct paravirt_patch_site; +#ifdef CONFIG_PARAVIRT +void apply_paravirt(struct paravirt_patch_site *start, + struct paravirt_patch_site *end); #else -# include "alternative_64.h" +static inline void +apply_paravirt(struct paravirt_patch_site *start, + struct paravirt_patch_site *end) +{} +#define __parainstructions NULL +#define __parainstructions_end NULL #endif + +extern void text_poke(void *addr, unsigned char *opcode, int len); + +#endif /* _ASM_X86_ALTERNATIVE_H */ diff --git a/include/asm-x86/alternative_32.h b/include/asm-x86/alternative_32.h deleted file mode 100644 index 4919b5ee8b9..00000000000 --- a/include/asm-x86/alternative_32.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _I386_ALTERNATIVE_H -#define _I386_ALTERNATIVE_H - -#include -#include -#include - -/* - * Alternative inline assembly for SMP. - * - * The LOCK_PREFIX macro defined here replaces the LOCK and - * LOCK_PREFIX macros used everywhere in the source tree. - * - * SMP alternatives use the same data structures as the other - * alternatives and the X86_FEATURE_UP flag to indicate the case of a - * UP system running a SMP kernel. The existing apply_alternatives() - * works fine for patching a SMP kernel for UP. - * - * The SMP alternative tables can be kept after boot and contain both - * UP and SMP versions of the instructions to allow switching back to - * SMP at runtime, when hotplugging in a new CPU, which is especially - * useful in virtualized environments. - * - * The very common lock prefix is handled as special case in a - * separate table which is a pure address list without replacement ptr - * and size information. That keeps the table sizes small. - */ - -#ifdef CONFIG_SMP -#define LOCK_PREFIX \ - ".section .smp_locks,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661f\n" /* address */ \ - ".previous\n" \ - "661:\n\tlock; " - -#else /* ! CONFIG_SMP */ -#define LOCK_PREFIX "" -#endif - -/* This must be included *after* the definition of LOCK_PREFIX */ -#include - -struct alt_instr { - u8 *instr; /* original instruction */ - u8 *replacement; - u8 cpuid; /* cpuid bit set for replacement */ - u8 instrlen; /* length of original instruction */ - u8 replacementlen; /* length of new instruction, <= instrlen */ - u8 pad1; -#ifdef CONFIG_X86_64 - u32 pad2; -#endif -}; - -extern void alternative_instructions(void); -extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end); - -struct module; - -#ifdef CONFIG_SMP -extern void alternatives_smp_module_add(struct module *mod, char *name, - void *locks, void *locks_end, - void *text, void *text_end); -extern void alternatives_smp_module_del(struct module *mod); -extern void alternatives_smp_switch(int smp); -#else -static inline void alternatives_smp_module_add(struct module *mod, char *name, - void *locks, void *locks_end, - void *text, void *text_end) {} -static inline void alternatives_smp_module_del(struct module *mod) {} -static inline void alternatives_smp_switch(int smp) {} -#endif /* CONFIG_SMP */ - -/* - * Alternative instructions for different CPU types or capabilities. - * - * This allows to use optimized instructions even on generic binary - * kernels. - * - * length of oldinstr must be longer or equal the length of newinstr - * It can be padded with nops as needed. - * - * For non barrier like inlines please define new variants - * without volatile and memory clobber. - */ -#define alternative(oldinstr, newinstr, feature) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature) : "memory") - -/* - * Alternative inline assembly with input. - * - * Pecularities: - * No memory clobber here. - * Argument numbers start with 1. - * Best is to use constraints that are fixed size (like (%1) ... "r") - * If you use variable sized constraints like "m" or "g" in the - * replacement make sure to pad to the worst case length. - */ -#define alternative_input(oldinstr, newinstr, feature, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature), ##input) - -/* Like alternative_input, but with a single output argument */ -#define alternative_io(oldinstr, newinstr, feature, output, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c[feat]\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" : output : [feat] "i" (feature), ##input) - -/* - * use this macro(s) if you need more than one output parameter - * in alternative_io - */ -#define ASM_OUTPUT2(a, b) a, b - -struct paravirt_patch_site; -#ifdef CONFIG_PARAVIRT -void apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end); -#else -static inline void -apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end) -{} -#define __parainstructions NULL -#define __parainstructions_end NULL -#endif - -extern void text_poke(void *addr, unsigned char *opcode, int len); - -#endif /* _I386_ALTERNATIVE_H */ diff --git a/include/asm-x86/alternative_64.h b/include/asm-x86/alternative_64.h deleted file mode 100644 index 50efcebae33..00000000000 --- a/include/asm-x86/alternative_64.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef _X86_64_ALTERNATIVE_H -#define _X86_64_ALTERNATIVE_H - -#include -#include -#include - -/* - * Alternative inline assembly for SMP. - * - * The LOCK_PREFIX macro defined here replaces the LOCK and - * LOCK_PREFIX macros used everywhere in the source tree. - * - * SMP alternatives use the same data structures as the other - * alternatives and the X86_FEATURE_UP flag to indicate the case of a - * UP system running a SMP kernel. The existing apply_alternatives() - * works fine for patching a SMP kernel for UP. - * - * The SMP alternative tables can be kept after boot and contain both - * UP and SMP versions of the instructions to allow switching back to - * SMP at runtime, when hotplugging in a new CPU, which is especially - * useful in virtualized environments. - * - * The very common lock prefix is handled as special case in a - * separate table which is a pure address list without replacement ptr - * and size information. That keeps the table sizes small. - */ - -#ifdef CONFIG_SMP -#define LOCK_PREFIX \ - ".section .smp_locks,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661f\n" /* address */ \ - ".previous\n" \ - "661:\n\tlock; " - -#else /* ! CONFIG_SMP */ -#define LOCK_PREFIX "" -#endif - -/* This must be included *after* the definition of LOCK_PREFIX */ -#include - -struct alt_instr { - u8 *instr; /* original instruction */ - u8 *replacement; - u8 cpuid; /* cpuid bit set for replacement */ - u8 instrlen; /* length of original instruction */ - u8 replacementlen; /* length of new instruction, <= instrlen */ - u8 pad1; -#ifdef CONFIG_X86_64 - u32 pad2; -#endif -}; - -extern void alternative_instructions(void); -extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end); - -struct module; - -#ifdef CONFIG_SMP -extern void alternatives_smp_module_add(struct module *mod, char *name, - void *locks, void *locks_end, - void *text, void *text_end); -extern void alternatives_smp_module_del(struct module *mod); -extern void alternatives_smp_switch(int smp); -#else -static inline void alternatives_smp_module_add(struct module *mod, char *name, - void *locks, void *locks_end, - void *text, void *text_end) {} -static inline void alternatives_smp_module_del(struct module *mod) {} -static inline void alternatives_smp_switch(int smp) {} -#endif /* CONFIG_SMP */ - -/* - * Alternative instructions for different CPU types or capabilities. - * - * This allows to use optimized instructions even on generic binary - * kernels. - * - * length of oldinstr must be longer or equal the length of newinstr - * It can be padded with nops as needed. - * - * For non barrier like inlines please define new variants - * without volatile and memory clobber. - */ -#define alternative(oldinstr, newinstr, feature) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature) : "memory") - -/* - * Alternative inline assembly with input. - * - * Pecularities: - * No memory clobber here. - * Argument numbers start with 1. - * Best is to use constraints that are fixed size (like (%1) ... "r") - * If you use variable sized constraints like "m" or "g" in the - * replacement make sure to pad to the worst case length. - */ -#define alternative_input(oldinstr, newinstr, feature, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature), ##input) - -/* Like alternative_input, but with a single output argument */ -#define alternative_io(oldinstr, newinstr, feature, output, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c[feat]\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" : output : [feat] "i" (feature), ##input) - -/* - * use this macro(s) if you need more than one output parameter - * in alternative_io - */ -#define ASM_OUTPUT2(a, b) a, b - -struct paravirt_patch_site; -#ifdef CONFIG_PARAVIRT -void apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end); -#else -static inline void -apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end) -{} -#define __parainstructions NULL -#define __parainstructions_end NULL -#endif - -extern void text_poke(void *addr, unsigned char *opcode, int len); - -#endif /* _X86_64_ALTERNATIVE_H */