From: Kevin Hilman Date: Fri, 3 Apr 2009 22:53:18 +0000 (-0700) Subject: OMAP2/3: GPIO: do not attempt to wake-enable X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=69b9d0a56861e424cdd2ff665e7b31775b149768;p=linux-2.6-omap-h63xx.git OMAP2/3: GPIO: do not attempt to wake-enable The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e3d8c..210a1c04555 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif