From: Alan Stern Date: Mon, 27 Oct 2008 16:07:44 +0000 (-0400) Subject: USB: prevent autosuspend during hub initialization X-Git-Tag: v2.6.28-rc3~46^2 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=61fbeba11c553c489ba5284c0ed67067dc7b7c0f;p=linux-2.6-omap-h63xx.git USB: prevent autosuspend during hub initialization This patch (as1153) fixes a potential problem in hub initialization. Starting in 2.6.28, initialization was split into several tasks to help speed up booting. This opens the possibility that the hub may be autosuspended before all the initialization tasks can complete. Normally that wouldn't matter, but with incomplete initialization there is a risk that the hub would never autoresume -- especially if devices were plugged into the hub beforehand. The solution is a simple one-line change to suppress autosuspend until the initialization is finished. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 37ff8aed256..b19cbfcd51d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -659,6 +659,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2); schedule_delayed_work(&hub->init_work, msecs_to_jiffies(delay)); + + /* Suppress autosuspend until init is done */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; return; /* Continues at init2: below */ } else { hub_power_on(hub, true);