From: Oliver Martin Date: Sat, 9 Aug 2008 02:49:26 +0000 (+0200) Subject: USB: Add vendor/product id of ZTE MF628 to option X-Git-Tag: v2.6.27-rc4~101^2~4 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6188a83f7264edebe9b8ee10ad7b2136d3531ea6;p=linux-2.6-omap-h63xx.git USB: Add vendor/product id of ZTE MF628 to option This adds the vendor and product id (19d2:0015) of the ZTE MF628 HSDPA modem to the option driver. It still needs a mode switch command issued beforehand, this is currently handled by a userspace tool. Signed-off-by: Oliver Martin Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e7753ccaf70..df472c7480a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -214,6 +214,10 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define TELIT_VENDOR_ID 0x1bc7 #define TELIT_PRODUCT_UC864E 0x1003 +/* ZTE PRODUCTS */ +#define ZTE_VENDOR_ID 0x19d2 +#define ZTE_PRODUCT_MF628 0x0015 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -340,6 +344,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids);