From: Frank Rowand <frowand@mvista.com>
Date: Tue, 28 Jun 2005 23:48:04 +0000 (-0700)
Subject: [PATCH] ppc64: change duplicate Kconfig menu "General setup" to "Bus Options"
X-Git-Tag: v2.6.14-rc1~1037^2~32
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=6020164499ff3a61cd8bebceb9e294a155079f71;p=linux-2.6-omap-h63xx.git

[PATCH] ppc64: change duplicate Kconfig menu "General setup" to "Bus Options"

arch/ppc64/Kconfig defines a "General setup" menu, but also sources
init/Kconfig which also defines a "General setup" menu.  Both of these
menus appear at the top level of make menuconfig.  Having two menus with
the same name is confusing.  This patch renames the ppc64/Kconfig menu to
be "Bus Options" and moves options in this menu which are not bus related
to the end of the "Platform support" menu.

There are many variations among architectures on the exact naming of the
"Bus Options" menu.  I chose to use the simplest one, which is also used
in arch/ppc/Kconfig.

Signed-off-by: Frank Rowand <frowand@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---

diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
index 2ce87836c67..4d4f81c6501 100644
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -350,13 +350,46 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+source "fs/Kconfig.binfmt"
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	select HOTPLUG
+	---help---
+	  Say Y here to be able to turn CPUs off and on.
+
+	  Say N if you are unsure.
+
+config PROC_DEVICETREE
+	bool "Support for Open Firmware device tree in /proc"
+	depends on !PPC_ISERIES
+	help
+	  This option adds a device-tree directory under /proc which contains
+	  an image of the device tree that the kernel copies from Open
+	  Firmware. If unsure, say Y here.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+	depends on !PPC_ISERIES
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  most cases you will need to specify the root device here.
+
 endmenu
 
 config ISA_DMA_API
 	bool
 	default y
 
-menu "General setup"
+menu "Bus Options"
 
 config ISA
 	bool
@@ -389,45 +422,12 @@ config PCI_DOMAINS
 	bool
 	default PCI
 
-source "fs/Kconfig.binfmt"
-
 source "drivers/pci/Kconfig"
 
-config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
-	depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
-	select HOTPLUG
-	---help---
-	  Say Y here to be able to turn CPUs off and on.
-
-	  Say N if you are unsure.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
 
-config PROC_DEVICETREE
-	bool "Support for Open Firmware device tree in /proc"
-	depends on !PPC_ISERIES
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware. If unsure, say Y here.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-	depends on !PPC_ISERIES
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
 endmenu
 
 source "net/Kconfig"