From: David Brownell Date: Mon, 16 May 2005 15:53:52 +0000 (-0700) Subject: [PATCH] smc91x needs settable IRQ trigger type X-Git-Tag: v2.6.13-rc1~49 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=5f13e7ec5c1d98f4a63a3a79e66b2b121051f5ac;p=linux-2.6-omap-h63xx.git [PATCH] smc91x needs settable IRQ trigger type For boards that invert the SMC91x IRQ line (maybe an FPGA inverts it), the set_irq_type() call can't assume IRQT_RISING. These particular boards currently use OMAP-specific calls to change the trigger type, but the boards break when set_irq_type() stops being a NOP. Signed-off-by: David Brownell --- diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index cfb9d3cdb04..1438fdd2082 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1998,7 +1998,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) if (retval) goto err_out; - set_irq_type(dev->irq, IRQT_RISING); + set_irq_type(dev->irq, SMC_IRQ_TRIGGER_TYPE); #ifdef SMC_USE_PXA_DMA { diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 946528e6b74..7089d86e857 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -182,6 +182,16 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#include +#include + +#define SMC_IRQ_TRIGGER_TYPE (( \ + machine_is_omap_h2() \ + || machine_is_omap_h3() \ + || (machine_is_omap_innovator() && !cpu_is_omap150()) \ + ) ? IRQT_FALLING : IRQT_RISING) + + #elif defined(CONFIG_SH_SH4202_MICRODEV) #define SMC_CAN_USE_8BIT 0 @@ -300,6 +310,9 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #endif +#ifndef SMC_IRQ_TRIGGER_TYPE +#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING +#endif #ifdef SMC_USE_PXA_DMA /*