From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Thu, 24 Jul 2008 04:28:55 +0000 (-0700)
Subject: atmel_pwm: set up only one PWM clock when allocating a clock
X-Git-Tag: v2.6.27-rc1~719
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=5aa0769d089125e63f8dc23e0283e559e1790493;p=linux-2.6-omap-h63xx.git

atmel_pwm: set up only one PWM clock when allocating a clock

This patch will only setup one clock, if free, and return this clock to the
caller.  The previous solution would setup both clocks with the same prescaler
and divider and return PWM_CPR_CLKB, thus taking both clocks in the same call
without the caller knowing.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
index 5b5a14dab3d..6aa5294dfec 100644
--- a/drivers/misc/atmel_pwm.c
+++ b/drivers/misc/atmel_pwm.c
@@ -211,8 +211,7 @@ int pwm_clk_alloc(unsigned prescale, unsigned div)
 	if ((mr & 0xffff) == 0) {
 		mr |= val;
 		ret = PWM_CPR_CLKA;
-	}
-	if ((mr & (0xffff << 16)) == 0) {
+	} else if ((mr & (0xffff << 16)) == 0) {
 		mr |= val << 16;
 		ret = PWM_CPR_CLKB;
 	}