From: Alan Stern Date: Mon, 14 Apr 2008 16:17:10 +0000 (-0400) Subject: USB: HCDs use the do_remote_wakeup flag X-Git-Tag: v2.6.26-rc1~1061^2~16 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=58a97ffeb2297f154659f339d77eb3f32c4d8b3e;p=linux-2.6-omap-h63xx.git USB: HCDs use the do_remote_wakeup flag When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 2ea333a43d6..edc31e13e95 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -932,7 +932,6 @@ static int autosuspend_check(struct usb_device *udev, int reschedule) * is disabled. Also fail if any interfaces require remote wakeup * but it isn't available. */ - udev->do_remote_wakeup = device_may_wakeup(&udev->dev); if (udev->pm_usage_cnt > 0) return -EBUSY; if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 21ac3781f21..536b433d24f 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -30,6 +30,8 @@ #ifdef CONFIG_PM +#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) + static int ehci_hub_control( struct usb_hcd *hcd, u16 typeReq, @@ -149,10 +151,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } /* enable remote wakeup on all ports */ - if (device_may_wakeup(&hcd->self.root_hub->dev)) - t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; + if (hcd->self.root_hub->do_remote_wakeup) + t2 |= PORT_WAKE_BITS; else - t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E); + t2 &= ~PORT_WAKE_BITS; if (t1 != t2) { ehci_vdbg (ehci, "port %d, %08x -> %08x\n", @@ -174,7 +176,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) /* allow remote wakeup */ mask = INTR_MASK; - if (!device_may_wakeup(&hcd->self.root_hub->dev)) + if (!hcd->self.root_hub->do_remote_wakeup) mask &= ~STS_PCD; ehci_writel(ehci, mask, &ehci->regs->intr_enable); ehci_readl(ehci, &ehci->regs->intr_enable); @@ -232,8 +234,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); - temp &= ~(PORT_RWC_BITS - | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E); + temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); if (test_bit(i, &ehci->bus_suspended) && (temp & PORT_SUSPEND)) { ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); @@ -534,8 +535,6 @@ ehci_hub_descriptor ( /*-------------------------------------------------------------------------*/ -#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) - static int ehci_hub_control ( struct usb_hcd *hcd, u16 typeReq, @@ -801,8 +800,6 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - if (device_may_wakeup(&hcd->self.root_hub->dev)) - temp |= PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); break; case USB_PORT_FEAT_POWER: diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index a0afc78b273..88dad4b5313 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -300,7 +300,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd) if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { int mask = INTR_MASK; - if (!device_may_wakeup(&hcd->self.root_hub->dev)) + if (!hcd->self.root_hub->do_remote_wakeup) mask &= ~STS_PCD; ehci_writel(ehci, mask, &ehci->regs->intr_enable); ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 66d773c726f..20b9a0d0742 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1400,7 +1400,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) spin_unlock_irqrestore(&isp116x->lock, flags); val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; - if (device_may_wakeup(&hcd->self.root_hub->dev)) + if (hcd->self.root_hub->do_remote_wakeup) val |= HCCONTROL_RWE; /* Wait for usb transfers to finish */ msleep(2); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 28d6d775eb5..cf3e1d25563 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -103,10 +103,9 @@ __acquires(ohci->lock) finish_unlinks (ohci, ohci_frame_no(ohci)); /* maybe resume can wake root hub */ - if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev) || - autostop) + if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { ohci->hc_control |= OHCI_CTRL_RWE; - else { + } else { ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable); ohci->hc_control &= ~OHCI_CTRL_RWE; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index fec9872dd9d..f65d5a85873 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -262,20 +262,12 @@ __acquires(uhci->lock) { int auto_stop; int int_enable, egsm_enable; + struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub; auto_stop = (new_state == UHCI_RH_AUTO_STOPPED); - dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev, - "%s%s\n", __FUNCTION__, + dev_dbg(&rhdev->dev, "%s%s\n", __func__, (auto_stop ? " (auto-stop)" : "")); - /* If we get a suspend request when we're already auto-stopped - * then there's nothing to do. - */ - if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) { - uhci->rh_state = new_state; - return; - } - /* Enable resume-detect interrupts if they work. * Then enter Global Suspend mode if _it_ works, still configured. */ @@ -285,8 +277,10 @@ __acquires(uhci->lock) if (remote_wakeup_is_broken(uhci)) egsm_enable = 0; if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable || - !device_may_wakeup( - &uhci_to_hcd(uhci)->self.root_hub->dev)) +#ifdef CONFIG_PM + (!auto_stop && !rhdev->do_remote_wakeup) || +#endif + (auto_stop && !device_may_wakeup(&rhdev->dev))) uhci->working_RD = int_enable = 0; outw(int_enable, uhci->io_addr + USBINTR); @@ -308,8 +302,7 @@ __acquires(uhci->lock) return; } if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) - dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev, - "Controller not stopped yet!\n"); + dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n"); uhci_get_current_frame_number(uhci);