From: Johannes Berg Date: Fri, 25 Jul 2008 08:45:33 +0000 (-0700) Subject: introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol X-Git-Tag: v2.6.27-rc1~486 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=58340a07c194e0aed7bc58b61ff24330bb2a409f;p=linux-2.6-omap-h63xx.git introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol In many cases, especially in networking, it can be beneficial to know at compile time whether the architecture can do unaligned accesses efficiently. This patch introduces a new Kconfig symbol HAVE_EFFICIENT_UNALIGNED_ACCESS for that purpose and adds it to the powerpc and x86 architectures. Also add some documentation about alignment and networking, and especially one intended use of this symbol. Signed-off-by: Johannes Berg Acked-by: Sam Ravnborg Acked-by: Ingo Molnar [x86 architecture part] Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt index b0472ac5226..f866c72291b 100644 --- a/Documentation/unaligned-memory-access.txt +++ b/Documentation/unaligned-memory-access.txt @@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(), where the source or destination (or both) are of type u8* or unsigned char*. Due to the byte-wise nature of this operation, unaligned accesses are avoided. + +Alignment vs. Networking +======================== + +On architectures that require aligned loads, networking requires that the IP +header is aligned on a four-byte boundary to optimise the IP stack. For +regular ethernet hardware, the constant NET_IP_ALIGN is used. On most +architectures this constant has the value 2 because the normal ethernet +header is 14 bytes long, so in order to get proper alignment one needs to +DMA to an address which can be expressed as 4*n + 2. One notable exception +here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned +addresses can be very expensive and dwarf the cost of unaligned loads. + +For some ethernet hardware that cannot DMA to unaligned addresses like +4*n+2 or non-ethernet hardware, this can be a problem, and it is then +required to copy the incoming frame into an aligned buffer. Because this is +unnecessary on architectures that can do unaligned accesses, the code can be +made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so: + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + skb = original skb +#else + skb = copy skb +#endif + -- -Author: Daniel Drake +Authors: Daniel Drake , + Johannes Berg With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt, -Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, -Uli Kunitz, Vadim Lobanov +Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz, +Vadim Lobanov diff --git a/arch/Kconfig b/arch/Kconfig index 6093c0be58b..b0fabfa864f 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -27,6 +27,25 @@ config KPROBES for kernel debugging, non-intrusive instrumentation and testing. If in doubt, say "N". +config HAVE_EFFICIENT_UNALIGNED_ACCESS + def_bool n + help + Some architectures are unable to perform unaligned accesses + without the use of get_unaligned/put_unaligned. Others are + unable to perform such accesses efficiently (e.g. trap on + unaligned access and require fixing it up in the exception + handler.) + + This symbol should be selected by an architecture if it can + perform unaligned accesses efficiently to allow different + code paths to be selected for these cases. Some network + drivers, for example, could opt to not fix up alignment + problems with received packets if doing so would not help + much. + + See Documentation/unaligned-memory-access.txt for more + information on the topic of unaligned memory accesses. + config KRETPROBES def_bool y depends on KPROBES && HAVE_KRETPROBES diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a487671c282..de6b49cd6be 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -112,6 +112,7 @@ config PPC select HAVE_FTRACE select HAVE_IDE select HAVE_IOREMAP_PROT + select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b2ddfcf0172..66f3ab05b18 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -28,6 +28,7 @@ config X86 select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER + select HAVE_EFFICIENT_UNALIGNED_ACCESS config ARCH_DEFCONFIG string