From: Ingo Molnar Date: Thu, 19 Feb 2009 11:54:10 +0000 (+0100) Subject: Documentation/ftrace.txt: update X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=5752674e140db5bce08c6bc60021a9bc3b960800;p=linux-2.6-omap-h63xx.git Documentation/ftrace.txt: update - fix typos/grammos and clarify the text - prettify the document some more Cc: Frederic Weisbecker Cc: Steven Rostedt Signed-off-by: Ingo Molnar --- diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 055bcd2992d..2041ee951c1 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -15,31 +15,31 @@ Introduction Ftrace is an internal tracer designed to help out developers and designers of systems to find what is going on inside the kernel. -It can be used for debugging or analyzing latencies and performance -issues that take place outside of user-space. +It can be used for debugging or analyzing latencies and +performance issues that take place outside of user-space. Although ftrace is the function tracer, it also includes an -infrastructure that allows for other types of tracing. Some of the -tracers that are currently in ftrace include a tracer to trace -context switches, the time it takes for a high priority task to -run after it was woken up, the time interrupts are disabled, and -more (ftrace allows for tracer plugins, which means that the list of -tracers can always grow). +infrastructure that allows for other types of tracing. Some of +the tracers that are currently in ftrace include a tracer to +trace context switches, the time it takes for a high priority +task to run after it was woken up, the time interrupts are +disabled, and more (ftrace allows for tracer plugins, which +means that the list of tracers can always grow). The File System --------------- -Ftrace uses the debugfs file system to hold the control files as well -as the files to display output. +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. To mount the debugfs system: # mkdir /debug # mount -t debugfs nodev /debug -(Note: it is more common to mount at /sys/kernel/debug, but for simplicity - this document will use /debug) +( Note: it is more common to mount at /sys/kernel/debug, but for + simplicity this document will use /debug) That's it! (assuming that you have ftrace configured into your kernel) @@ -50,94 +50,124 @@ of ftrace. Here is a list of some of the key files: Note: all time values are in microseconds. - current_tracer: This is used to set or display the current tracer - that is configured. - - available_tracers: This holds the different types of tracers that - have been compiled into the kernel. The tracers - listed here can be configured by echoing their name - into current_tracer. - - tracing_enabled: This sets or displays whether the current_tracer - is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 to enable it. - - trace: This file holds the output of the trace in a human readable - format (described below). - - latency_trace: This file shows the same trace but the information - is organized more to display possible latencies - in the system (described below). - - trace_pipe: The output is the same as the "trace" file but this - file is meant to be streamed with live tracing. - Reads from this file will block until new data - is retrieved. Unlike the "trace" and "latency_trace" - files, this file is a consumer. This means reading - from this file causes sequential reads to display - more current data. Once data is read from this - file, it is consumed, and will not be read - again with a sequential read. The "trace" and - "latency_trace" files are static, and if the - tracer is not adding more data, they will display - the same information every time they are read. - - trace_options: This file lets the user control the amount of data - that is displayed in one of the above output - files. - - trace_max_latency: Some of the tracers record the max latency. - For example, the time interrupts are disabled. - This time is saved in this file. The max trace - will also be stored, and displayed by either - "trace" or "latency_trace". A new max trace will - only be recorded if the latency is greater than - the value in this file. (in microseconds) - - buffer_size_kb: This sets or displays the number of kilobytes each CPU - buffer can hold. The tracer buffers are the same size - for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The - trace buffers are allocated in pages (blocks of memory - that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes - than requested, the rest of the page will be used, - making the actual allocation bigger than requested. - (Note, the size may not be a multiple of the page size due - to buffer managment overhead.) - - This can only be updated when the current_tracer - is set to "nop". - - tracing_cpumask: This is a mask that lets the user only trace - on specified CPUS. The format is a hex string - representing the CPUS. - - set_ftrace_filter: When dynamic ftrace is configured in (see the - section below "dynamic ftrace"), the code is dynamically - modified (code text rewrite) to disable calling of the - function profiler (mcount). This lets tracing be configured - in with practically no overhead in performance. This also - has a side effect of enabling or disabling specific functions - to be traced. Echoing names of functions into this file - will limit the trace to only those functions. - - set_ftrace_notrace: This has an effect opposite to that of - set_ftrace_filter. Any function that is added here will not - be traced. If a function exists in both set_ftrace_filter - and set_ftrace_notrace, the function will _not_ be traced. - - set_ftrace_pid: Have the function tracer only trace a single thread. - - set_graph_function: Select the function where the trace have to start - with the function graph tracer (See the section - "dynamic ftrace" for more details). - - available_filter_functions: This lists the functions that ftrace - has processed and can trace. These are the function - names that you can pass to "set_ftrace_filter" or - "set_ftrace_notrace". (See the section "dynamic ftrace" - below for more details.) + current_tracer: + + This is used to set or display the current tracer + that is configured. + + available_tracers: + + This holds the different types of tracers that + have been compiled into the kernel. The + tracers listed here can be configured by + echoing their name into current_tracer. + + tracing_enabled: + + This sets or displays whether the current_tracer + is activated and tracing or not. Echo 0 into this + file to disable the tracer or 1 to enable it. + + trace: + + This file holds the output of the trace in a human + readable format (described below). + + latency_trace: + + This file shows the same trace but the information + is organized more to display possible latencies + in the system (described below). + + trace_pipe: + + The output is the same as the "trace" file but this + file is meant to be streamed with live tracing. + Reads from this file will block until new data + is retrieved. Unlike the "trace" and "latency_trace" + files, this file is a consumer. This means reading + from this file causes sequential reads to display + more current data. Once data is read from this + file, it is consumed, and will not be read + again with a sequential read. The "trace" and + "latency_trace" files are static, and if the + tracer is not adding more data, they will display + the same information every time they are read. + + trace_options: + + This file lets the user control the amount of data + that is displayed in one of the above output + files. + + trace_max_latency: + + Some of the tracers record the max latency. + For example, the time interrupts are disabled. + This time is saved in this file. The max trace + will also be stored, and displayed by either + "trace" or "latency_trace". A new max trace will + only be recorded if the latency is greater than + the value in this file. (in microseconds) + + buffer_size_kb: + + This sets or displays the number of kilobytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + ( Note, the size may not be a multiple of the page size + due to buffer managment overhead. ) + + This can only be updated when the current_tracer + is set to "nop". + + tracing_cpumask: + + This is a mask that lets the user only trace + on specified CPUS. The format is a hex string + representing the CPUS. + + set_ftrace_filter: + + When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: + + This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. + + set_ftrace_pid: + + Have the function tracer only trace a single thread. + + set_graph_function: + + Set a "trigger" function where tracing should start + with the function graph tracer (See the section + "dynamic ftrace" for more details). + + available_filter_functions: + + This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) The Tracers @@ -145,44 +175,66 @@ The Tracers Here is the list of current tracers that may be configured. - function - function tracer that uses mcount to trace all functions. + "function" + + Function call tracer to trace all kernel functions. + + "function_graph_tracer" + + Similar to the function tracer except that the + function tracer probes the functions on their entry + whereas the function graph tracer traces on both entry + and exit of the functions. It then provides the ability + to draw a graph of function calls similar to C code + source. + + "sched_switch" + + Traces the context switches and wakeups between tasks. + + "irqsoff" + + Traces the areas that disable interrupts and saves + the trace with the longest max latency. + See tracing_max_latency. When a new max is recorded, + it replaces the old trace. It is best to view this + trace via the latency_trace file. - function_graph_tracer - similar to the function tracer except that the - function tracer probes the functions on their entry whereas the - function graph tracer traces on both entry and exit of the - functions. It then provides the ability to draw a graph of - function calls like a primitive C code source. + "preemptoff" - sched_switch - traces the context switches between tasks. + Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. - irqsoff - traces the areas that disable interrupts and saves - the trace with the longest max latency. - See tracing_max_latency. When a new max is recorded, - it replaces the old trace. It is best to view this - trace via the latency_trace file. + "preemptirqsoff" - preemptoff - Similar to irqsoff but traces and records the amount of - time for which preemption is disabled. + Similar to irqsoff and preemptoff, but traces and + records the largest time for which irqs and/or preemption + is disabled. - preemptirqsoff - Similar to irqsoff and preemptoff, but traces and - records the largest time for which irqs and/or preemption - is disabled. + "wakeup" - wakeup - Traces and records the max latency that it takes for - the highest priority task to get scheduled after - it has been woken up. + Traces and records the max latency that it takes for + the highest priority task to get scheduled after + it has been woken up. - nop - This is not a tracer. To remove all tracers from tracing - simply echo "nop" into current_tracer. + "hw-branch-tracer" - hw-branch-tracer - traces branches on all cpu's in a circular buffer. + Uses the BTS CPU feature on x86 CPUs to traces all + branches executed. + + "nop" + + This is the "trace nothing" tracer. To remove all + tracers from tracing simply echo "nop" into + current_tracer. Examples of using the tracer ---------------------------- -Here are typical examples of using the tracers when controlling them only -with the debugfs interface (without using any user-land utilities). +Here are typical examples of using the tracers when controlling +them only with the debugfs interface (without using any +user-land utilities). Output format: -------------- @@ -199,16 +251,16 @@ Here is an example of the output format of the file "trace" bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput -------- -A header is printed with the tracer name that is represented by the trace. -In this case the tracer is "function". Then a header showing the format. Task -name "bash", the task PID "4251", the CPU that it was running on -"01", the timestamp in . format, the function name that was -traced "path_put" and the parent function that called this function -"path_walk". The timestamp is the time at which the function was -entered. +A header is printed with the tracer name that is represented by +the trace. In this case the tracer is "function". Then a header +showing the format. Task name "bash", the task PID "4251", the +CPU that it was running on "01", the timestamp in . +format, the function name that was traced "path_put" and the +parent function that called this function "path_walk". The +timestamp is the time at which the function was entered. -The sched_switch tracer also includes tracing of task wakeups and -context switches. +The sched_switch tracer also includes tracing of task wakeups +and context switches. ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S @@ -217,8 +269,8 @@ context switches. kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R -Wake ups are represented by a "+" and the context switches are shown as -"==>". The format is: +Wake ups are represented by a "+" and the context switches are +shown as "==>". The format is: Context switches: @@ -232,19 +284,20 @@ Wake ups are represented by a "+" and the context switches are shown as :: + :: -The prio is the internal kernel priority, which is the inverse of the -priority that is usually displayed by user-space tools. Zero represents -the highest priority (99). Prio 100 starts the "nice" priorities with -100 being equal to nice -20 and 139 being nice 19. The prio "140" is -reserved for the idle task which is the lowest priority thread (pid 0). +The prio is the internal kernel priority, which is the inverse +of the priority that is usually displayed by user-space tools. +Zero represents the highest priority (99). Prio 100 starts the +"nice" priorities with 100 being equal to nice -20 and 139 being +nice 19. The prio "140" is reserved for the idle task which is +the lowest priority thread (pid 0). Latency trace format -------------------- -For traces that display latency times, the latency_trace file gives -somewhat more information to see why a latency happened. Here is a typical -trace. +For traces that display latency times, the latency_trace file +gives somewhat more information to see why a latency happened. +Here is a typical trace. # tracer: irqsoff # @@ -271,20 +324,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 -0 0d.s1 98us : trace_hardirqs_on (do_softirq) +This shows that the current tracer is "irqsoff" tracing the time +for which interrupts were disabled. It gives the trace version +and the version of the kernel upon which this was executed on +(2.6.26-rc8). Then it displays the max latency in microsecs (97 +us). The number of trace entries displayed and the total number +recorded (both are three: #3/3). The type of preemption that was +used (PREEMPT). VP, KP, SP, and HP are always zero and are +reserved for later use. #P is the number of online CPUS (#P:2). -This shows that the current tracer is "irqsoff" tracing the time for which -interrupts were disabled. It gives the trace version and the version -of the kernel upon which this was executed on (2.6.26-rc8). Then it displays -the max latency in microsecs (97 us). The number of trace entries displayed -and the total number recorded (both are three: #3/3). The type of -preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero -and are reserved for later use. #P is the number of online CPUS (#P:2). - -The task is the process that was running when the latency occurred. -(swapper pid: 0). +The task is the process that was running when the latency +occurred. (swapper pid: 0). -The start and stop (the functions in which the interrupts were disabled and -enabled respectively) that caused the latencies: +The start and stop (the functions in which the interrupts were +disabled and enabled respectively) that caused the latencies: apic_timer_interrupt is where the interrupts were disabled. do_softirq is where they were enabled again. @@ -320,12 +373,12 @@ The above is mostly meaningful for kernel developers. latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And - needs to be fixed to be only relative to the same CPU. - The marks are determined by the difference between this - current trace and the next trace. - '!' - greater than preempt_mark_thresh (default 100) - '+' - greater than 1 microsecond - ' ' - less than or equal to 1 microsecond. + needs to be fixed to be only relative to the same CPU. + The marks are determined by the difference between this + current trace and the next trace. + '!' - greater than preempt_mark_thresh (default 100) + '+' - greater than 1 microsecond + ' ' - less than or equal to 1 microsecond. The rest is the same as the 'trace' file. @@ -333,14 +386,15 @@ The above is mostly meaningful for kernel developers. trace_options ------------- -The trace_options file is used to control what gets printed in the trace -output. To see what is available, simply cat the file: +The trace_options file is used to control what gets printed in +the trace output. To see what is available, simply cat the file: cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj -To disable one of the options, echo in the option prepended with "no". +To disable one of the options, echo in the option prepended with +"no". echo noprint-parent > /debug/tracing/trace_options @@ -350,8 +404,8 @@ To enable an option, leave off the "no". Here are the available options: - print-parent - On function traces, display the calling function - as well as the function being traced. + print-parent - On function traces, display the calling (parent) + function as well as the function being traced. print-parent: bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul @@ -360,15 +414,16 @@ Here are the available options: bash-4000 [01] 1477.606694: simple_strtoul - sym-offset - Display not only the function name, but also the offset - in the function. For example, instead of seeing just - "ktime_get", you will see "ktime_get+0xb/0x20". + sym-offset - Display not only the function name, but also the + offset in the function. For example, instead of + seeing just "ktime_get", you will see + "ktime_get+0xb/0x20". sym-offset: bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 - sym-addr - this will also display the function address as well as - the function name. + sym-addr - this will also display the function address as well + as the function name. sym-addr: bash-4000 [01] 1477.606694: simple_strtoul @@ -378,35 +433,41 @@ Here are the available options: bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ (+0.000ms): simple_strtoul (strict_strtoul) - raw - This will display raw numbers. This option is best for use with - user applications that can translate the raw numbers better than - having it done in the kernel. + raw - This will display raw numbers. This option is best for + use with user applications that can translate the raw + numbers better than having it done in the kernel. - hex - Similar to raw, but the numbers will be in a hexadecimal format. + hex - Similar to raw, but the numbers will be in a hexadecimal + format. bin - This will print out the formats in raw binary. block - TBD (needs update) - stacktrace - This is one of the options that changes the trace itself. - When a trace is recorded, so is the stack of functions. - This allows for back traces of trace sites. + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. - userstacktrace - This option changes the trace. - It records a stacktrace of the current userspace thread. + userstacktrace - This option changes the trace. It records a + stacktrace of the current userspace thread. - sym-userobj - when user stacktrace are enabled, look up which object the - address belongs to, and print a relative address - This is especially useful when ASLR is on, otherwise you don't - get a chance to resolve the address to object/file/line after the app is no - longer running + sym-userobj - when user stacktrace are enabled, look up which + object the address belongs to, and print a + relative address. This is especially useful when + ASLR is on, otherwise you don't get a chance to + resolve the address to object/file/line after + the app is no longer running - The lookup is performed when you read trace,trace_pipe,latency_trace. Example: + The lookup is performed when you read + trace,trace_pipe,latency_trace. Example: a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] - sched-tree - TBD (any users??) + sched-tree - trace all tasks that are on the runqueue, at + every scheduling event. Will add overhead if + there's a lot of tasks running at once. sched_switch @@ -443,18 +504,19 @@ of how to use it. [...] -As we have discussed previously about this format, the header shows -the name of the trace and points to the options. The "FUNCTION" -is a misnomer since here it represents the wake ups and context -switches. +As we have discussed previously about this format, the header +shows the name of the trace and points to the options. The +"FUNCTION" is a misnomer since here it represents the wake ups +and context switches. -The sched_switch file only lists the wake ups (represented with '+') -and context switches ('==>') with the previous task or current task -first followed by the next task or task waking up. The format for both -of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO -is the inverse of the actual priority with zero (0) being the highest -priority and the nice values starting at 100 (nice -20). Below is -a quick chart to map the kernel priority to user land priorities. +The sched_switch file only lists the wake ups (represented with +'+') and context switches ('==>') with the previous task or +current task first followed by the next task or task waking up. +The format for both of these is PID:KERNEL-PRIO:TASK-STATE. +Remember that the KERNEL-PRIO is the inverse of the actual +priority with zero (0) being the highest priority and the nice +values starting at 100 (nice -20). Below is a quick chart to map +the kernel priority to user land priorities. Kernel priority: 0 to 99 ==> user RT priority 99 to 0 Kernel priority: 100 to 139 ==> user nice -20 to 19 @@ -475,10 +537,10 @@ The task states are: ftrace_enabled -------------- -The following tracers (listed below) give different output depending -on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled, -one can either use the sysctl function or set it via the proc -file system interface. +The following tracers (listed below) give different output +depending on whether or not the sysctl ftrace_enabled is set. To +set ftrace_enabled, one can either use the sysctl function or +set it via the proc file system interface. sysctl kernel.ftrace_enabled=1 @@ -486,12 +548,12 @@ file system interface. echo 1 > /proc/sys/kernel/ftrace_enabled -To disable ftrace_enabled simply replace the '1' with '0' in -the above commands. +To disable ftrace_enabled simply replace the '1' with '0' in the +above commands. -When ftrace_enabled is set the tracers will also record the functions -that are within the trace. The descriptions of the tracers -will also show an example with ftrace enabled. +When ftrace_enabled is set the tracers will also record the +functions that are within the trace. The descriptions of the +tracers will also show an example with ftrace enabled. irqsoff @@ -499,17 +561,18 @@ irqsoff When interrupts are disabled, the CPU can not react to any other external event (besides NMIs and SMIs). This prevents the timer -interrupt from triggering or the mouse interrupt from letting the -kernel know of a new mouse event. The result is a latency with the -reaction time. +interrupt from triggering or the mouse interrupt from letting +the kernel know of a new mouse event. The result is a latency +with the reaction time. -The irqsoff tracer tracks the time for which interrupts are disabled. -When a new maximum latency is hit, the tracer saves the trace leading up -to that latency point so that every time a new maximum is reached, the old -saved trace is discarded and the new trace is saved. +The irqsoff tracer tracks the time for which interrupts are +disabled. When a new maximum latency is hit, the tracer saves +the trace leading up to that latency point so that every time a +new maximum is reached, the old saved trace is discarded and the +new trace is saved. -To reset the maximum, echo 0 into tracing_max_latency. Here is an -example: +To reset the maximum, echo 0 into tracing_max_latency. Here is +an example: # echo irqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -544,10 +607,11 @@ irqsoff latency trace v1.1.5 on 2.6.26 Here we see that that we had a latency of 12 microsecs (which is -very good). The _write_lock_irq in sys_setpgid disabled interrupts. -The difference between the 12 and the displayed timestamp 14us occurred -because the clock was incremented between the time of recording the max -latency and the time of recording the function that had that latency. +very good). The _write_lock_irq in sys_setpgid disabled +interrupts. The difference between the 12 and the displayed +timestamp 14us occurred because the clock was incremented +between the time of recording the max latency and the time of +recording the function that had that latency. Note the above example had ftrace_enabled not set. If we set the ftrace_enabled, we get a much larger output: @@ -598,24 +662,24 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that by enabling -function tracing, we incur an added overhead. This overhead may -extend the latency times. But nevertheless, this trace has provided -some very helpful debugging information. +functions that were called during that time. Note that by +enabling function tracing, we incur an added overhead. This +overhead may extend the latency times. But nevertheless, this +trace has provided some very helpful debugging information. preemptoff ---------- -When preemption is disabled, we may be able to receive interrupts but -the task cannot be preempted and a higher priority task must wait -for preemption to be enabled again before it can preempt a lower -priority task. +When preemption is disabled, we may be able to receive +interrupts but the task cannot be preempted and a higher +priority task must wait for preemption to be enabled again +before it can preempt a lower priority task. The preemptoff tracer traces the places that disable preemption. -Like the irqsoff tracer, it records the maximum latency for which preemption -was disabled. The control of preemptoff tracer is much like the irqsoff -tracer. +Like the irqsoff tracer, it records the maximum latency for +which preemption was disabled. The control of preemptoff tracer +is much like the irqsoff tracer. # echo preemptoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -649,11 +713,12 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) -This has some more changes. Preemption was disabled when an interrupt -came in (notice the 'h'), and was enabled while doing a softirq. -(notice the 's'). But we also see that interrupts have been disabled -when entering the preempt off section and leaving it (the 'd'). -We do not know if interrupts were enabled in the mean time. +This has some more changes. Preemption was disabled when an +interrupt came in (notice the 'h'), and was enabled while doing +a softirq. (notice the 's'). But we also see that interrupts +have been disabled when entering the preempt off section and +leaving it (the 'd'). We do not know if interrupts were enabled +in the mean time. # tracer: preemptoff # @@ -712,28 +777,30 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) -The above is an example of the preemptoff trace with ftrace_enabled -set. Here we see that interrupts were disabled the entire time. -The irq_enter code lets us know that we entered an interrupt 'h'. -Before that, the functions being traced still show that it is not -in an interrupt, but we can see from the functions themselves that -this is not the case. +The above is an example of the preemptoff trace with +ftrace_enabled set. Here we see that interrupts were disabled +the entire time. The irq_enter code lets us know that we entered +an interrupt 'h'. Before that, the functions being traced still +show that it is not in an interrupt, but we can see from the +functions themselves that this is not the case. -Notice that __do_softirq when called does not have a preempt_count. -It may seem that we missed a preempt enabling. What really happened -is that the preempt count is held on the thread's stack and we -switched to the softirq stack (4K stacks in effect). The code -does not copy the preempt count, but because interrupts are disabled, -we do not need to worry about it. Having a tracer like this is good -for letting people know what really happens inside the kernel. +Notice that __do_softirq when called does not have a +preempt_count. It may seem that we missed a preempt enabling. +What really happened is that the preempt count is held on the +thread's stack and we switched to the softirq stack (4K stacks +in effect). The code does not copy the preempt count, but +because interrupts are disabled, we do not need to worry about +it. Having a tracer like this is good for letting people know +what really happens inside the kernel. preemptirqsoff -------------- -Knowing the locations that have interrupts disabled or preemption -disabled for the longest times is helpful. But sometimes we would -like to know when either preemption and/or interrupts are disabled. +Knowing the locations that have interrupts disabled or +preemption disabled for the longest times is helpful. But +sometimes we would like to know when either preemption and/or +interrupts are disabled. Consider the following code: @@ -753,11 +820,13 @@ The preemptoff tracer will record the total length of call_function_with_irqs_and_preemption_off() and call_function_with_preemption_off(). -But neither will trace the time that interrupts and/or preemption -is disabled. This total time is the time that we can not schedule. -To record this time, use the preemptirqsoff tracer. +But neither will trace the time that interrupts and/or +preemption is disabled. This total time is the time that we can +not schedule. To record this time, use the preemptirqsoff +tracer. -Again, using this trace is much like the irqsoff and preemptoff tracers. +Again, using this trace is much like the irqsoff and preemptoff +tracers. # echo preemptirqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -793,9 +862,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 The trace_hardirqs_off_thunk is called from assembly on x86 when -interrupts are disabled in the assembly code. Without the function -tracing, we do not know if interrupts were enabled within the preemption -points. We do see that it started with preemption enabled. +interrupts are disabled in the assembly code. Without the +function tracing, we do not know if interrupts were enabled +within the preemption points. We do see that it started with +preemption enabled. Here is a trace with ftrace_enabled set: @@ -883,40 +953,42 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) -This is a very interesting trace. It started with the preemption of -the ls task. We see that the task had the "need_resched" bit set -via the 'N' in the trace. Interrupts were disabled before the spin_lock -at the beginning of the trace. We see that a schedule took place to run -sshd. When the interrupts were enabled, we took an interrupt. -On return from the interrupt handler, the softirq ran. We took another -interrupt while running the softirq as we see from the capital 'H'. +This is a very interesting trace. It started with the preemption +of the ls task. We see that the task had the "need_resched" bit +set via the 'N' in the trace. Interrupts were disabled before +the spin_lock at the beginning of the trace. We see that a +schedule took place to run sshd. When the interrupts were +enabled, we took an interrupt. On return from the interrupt +handler, the softirq ran. We took another interrupt while +running the softirq as we see from the capital 'H'. wakeup ------ -In a Real-Time environment it is very important to know the wakeup -time it takes for the highest priority task that is woken up to the -time that it executes. This is also known as "schedule latency". -I stress the point that this is about RT tasks. It is also important -to know the scheduling latency of non-RT tasks, but the average -schedule latency is better for non-RT tasks. Tools like -LatencyTop are more appropriate for such measurements. +In a Real-Time environment it is very important to know the +wakeup time it takes for the highest priority task that is woken +up to the time that it executes. This is also known as "schedule +latency". I stress the point that this is about RT tasks. It is +also important to know the scheduling latency of non-RT tasks, +but the average schedule latency is better for non-RT tasks. +Tools like LatencyTop are more appropriate for such +measurements. Real-Time environments are interested in the worst case latency. -That is the longest latency it takes for something to happen, and -not the average. We can have a very fast scheduler that may only -have a large latency once in a while, but that would not work well -with Real-Time tasks. The wakeup tracer was designed to record -the worst case wakeups of RT tasks. Non-RT tasks are not recorded -because the tracer only records one worst case and tracing non-RT -tasks that are unpredictable will overwrite the worst case latency -of RT tasks. - -Since this tracer only deals with RT tasks, we will run this slightly -differently than we did with the previous tracers. Instead of performing -an 'ls', we will run 'sleep 1' under 'chrt' which changes the -priority of the task. +That is the longest latency it takes for something to happen, +and not the average. We can have a very fast scheduler that may +only have a large latency once in a while, but that would not +work well with Real-Time tasks. The wakeup tracer was designed +to record the worst case wakeups of RT tasks. Non-RT tasks are +not recorded because the tracer only records one worst case and +tracing non-RT tasks that are unpredictable will overwrite the +worst case latency of RT tasks. + +Since this tracer only deals with RT tasks, we will run this +slightly differently than we did with the previous tracers. +Instead of performing an 'ls', we will run 'sleep 1' under +'chrt' which changes the priority of the task. # echo wakeup > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -946,17 +1018,16 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 -0 1d..4 4us : schedule (cpu_idle) +Running this on an idle system, we see that it only took 4 +microseconds to perform the task switch. Note, since the trace +marker in the schedule is before the actual "switch", we stop +the tracing when the recorded task is about to schedule in. This +may change if we add a new marker at the end of the scheduler. -Running this on an idle system, we see that it only took 4 microseconds -to perform the task switch. Note, since the trace marker in the -schedule is before the actual "switch", we stop the tracing when -the recorded task is about to schedule in. This may change if -we add a new marker at the end of the scheduler. - -Notice that the recorded task is 'sleep' with the PID of 4901 and it -has an rt_prio of 5. This priority is user-space priority and not -the internal kernel priority. The policy is 1 for SCHED_FIFO and 2 -for SCHED_RR. +Notice that the recorded task is 'sleep' with the PID of 4901 +and it has an rt_prio of 5. This priority is user-space priority +and not the internal kernel priority. The policy is 1 for +SCHED_FIFO and 2 for SCHED_RR. Doing the same with chrt -r 5 and ftrace_enabled set. @@ -1013,24 +1084,25 @@ ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) ksoftirq-7 1d..4 50us : schedule (__cond_resched) -The interrupt went off while running ksoftirqd. This task runs at -SCHED_OTHER. Why did not we see the 'N' set early? This may be -a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks -configured, the interrupt and softirq run with their own stack. -Some information is held on the top of the task's stack (need_resched -and preempt_count are both stored there). The setting of the NEED_RESCHED -bit is done directly to the task's stack, but the reading of the -NEED_RESCHED is done by looking at the current stack, which in this case -is the stack for the hard interrupt. This hides the fact that NEED_RESCHED -has been set. We do not see the 'N' until we switch back to the task's +The interrupt went off while running ksoftirqd. This task runs +at SCHED_OTHER. Why did not we see the 'N' set early? This may +be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K +stacks configured, the interrupt and softirq run with their own +stack. Some information is held on the top of the task's stack +(need_resched and preempt_count are both stored there). The +setting of the NEED_RESCHED bit is done directly to the task's +stack, but the reading of the NEED_RESCHED is done by looking at +the current stack, which in this case is the stack for the hard +interrupt. This hides the fact that NEED_RESCHED has been set. +We do not see the 'N' until we switch back to the task's assigned stack. function -------- This tracer is the function tracer. Enabling the function tracer -can be done from the debug file system. Make sure the ftrace_enabled is -set; otherwise this tracer is a nop. +can be done from the debug file system. Make sure the +ftrace_enabled is set; otherwise this tracer is a nop. # sysctl kernel.ftrace_enabled=1 # echo function > /debug/tracing/current_tracer @@ -1060,14 +1132,15 @@ set; otherwise this tracer is a nop. [...] -Note: function tracer uses ring buffers to store the above entries. -The newest data may overwrite the oldest data. Sometimes using echo to -stop the trace is not sufficient because the tracing could have overwritten -the data that you wanted to record. For this reason, it is sometimes better to -disable tracing directly from a program. This allows you to stop the -tracing at the point that you hit the part that you are interested in. -To disable the tracing directly from a C program, something like following -code snippet can be used: +Note: function tracer uses ring buffers to store the above +entries. The newest data may overwrite the oldest data. +Sometimes using echo to stop the trace is not sufficient because +the tracing could have overwritten the data that you wanted to +record. For this reason, it is sometimes better to disable +tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are +interested in. To disable the tracing directly from a C program, +something like following code snippet can be used: int trace_fd; [...] @@ -1082,10 +1155,10 @@ int main(int argc, char *argv[]) { } Note: Here we hard coded the path name. The debugfs mount is not -guaranteed to be at /debug (and is more commonly at /sys/kernel/debug). -For simple one time traces, the above is sufficent. For anything else, -a search through /proc/mounts may be needed to find where the debugfs -file-system is mounted. +guaranteed to be at /debug (and is more commonly at +/sys/kernel/debug). For simple one time traces, the above is +sufficent. For anything else, a search through /proc/mounts may +be needed to find where the debugfs file-system is mounted. Single thread tracing @@ -1186,10 +1259,11 @@ following format: 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf -The tracer may be used to dump the trace for the oops'ing cpu on a -kernel oops into the system log. To enable this, ftrace_dump_on_oops -must be set. To set ftrace_dump_on_oops, one can either use the sysctl -function or set it via the proc system interface. +The tracer may be used to dump the trace for the oops'ing cpu on +a kernel oops into the system log. To enable this, +ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one +can either use the sysctl function or set it via the proc system +interface. sysctl kernel.ftrace_dump_on_oops=1 @@ -1198,8 +1272,8 @@ or echo 1 > /proc/sys/kernel/ftrace_dump_on_oops -Here's an example of such a dump after a null pointer dereference in a -kernel module: +Here's an example of such a dump after a null pointer +dereference in a kernel module: [57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [57848.106019] IP: [] open+0x6/0x14 [oops] @@ -1239,25 +1313,34 @@ kernel module: function graph tracer --------------------------- -This tracer is similar to the function tracer except that it probes -a function on its entry and its exit. -This is done by setting a dynamically allocated stack of return addresses on each -task_struct. Then the tracer overwrites the return address of each function traced -to set a custom probe. Thus the original return address is stored on the stack of return -address in the task_struct. +This tracer is similar to the function tracer except that it +probes a function on its entry and its exit. This is done by +using a dynamically allocated stack of return addresses in each +task_struct. On function entry the tracer overwrites the return +address of each function traced to set a custom probe. Thus the +original return address is stored on the stack of return address +in the task_struct. -Probing on both extremities of a function leads to special features such as +Probing on both ends of a function leads to special features +such as: -_ measure of function's time execution -_ having a reliable call stack to draw function calls graph +- measure of a function's time execution +- having a reliable call stack to draw function calls graph This tracer is useful in several situations: -_ you want to find the reason of a strange kernel behavior and need to see - what happens in detail on any areas (or specific ones). -_ you are experiencing weird latencies but it's difficult to find its origin. -_ you want to find quickly which path is taken by a specific function -_ you just want to see what happens inside your kernel +- you want to find the reason of a strange kernel behavior and + need to see what happens in detail on any areas (or specific + ones). + +- you are experiencing weird latencies but it's difficult to + find its origin. + +- you want to find quickly which path is taken by a specific + function + +- you just want to peek inside a working kernel and want to see + what happens there. # tracer: function_graph # @@ -1282,24 +1365,28 @@ _ you just want to see what happens inside your kernel 0) 0.586 us | _spin_unlock(); -There are several columns that can be dynamically enabled/disabled. -You can use every combination of options you want, depending on your needs. +There are several columns that can be dynamically +enabled/disabled. You can use every combination of options you +want, depending on your needs. -_ The cpu number on which the function executed is default enabled. - It is sometimes better to only trace one cpu (see tracing_cpu_mask file) - or you might sometimes see unordered function calls while cpu tracing switch. +- The cpu number on which the function executed is default + enabled. It is sometimes better to only trace one cpu (see + tracing_cpu_mask file) or you might sometimes see unordered + function calls while cpu tracing switch. hide: echo nofuncgraph-cpu > /debug/tracing/trace_options show: echo funcgraph-cpu > /debug/tracing/trace_options -_ The duration (function's time of execution) is displayed on the closing bracket - line of a function or on the same line than the current function in case of a leaf - one. It is default enabled. +- The duration (function's time of execution) is displayed on + the closing bracket line of a function or on the same line + than the current function in case of a leaf one. It is default + enabled. hide: echo nofuncgraph-duration > /debug/tracing/trace_options show: echo funcgraph-duration > /debug/tracing/trace_options -_ The overhead field precedes the duration one in case of reached duration thresholds. +- The overhead field precedes the duration field in case of + reached duration thresholds. hide: echo nofuncgraph-overhead > /debug/tracing/trace_options show: echo funcgraph-overhead > /debug/tracing/trace_options @@ -1328,8 +1415,8 @@ _ The overhead field precedes the duration one in case of reached duration thres ! means that the function exceeded 100 usecs. -_ The task/pid field displays the thread cmdline and pid which executed the function. - It is default disabled. +- The task/pid field displays the thread cmdline and pid which + executed the function. It is default disabled. hide: echo nofuncgraph-proc > /debug/tracing/trace_options show: echo funcgraph-proc > /debug/tracing/trace_options @@ -1351,8 +1438,9 @@ _ The task/pid field displays the thread cmdline and pid which executed the func 0) sh-4802 | + 49.370 us | } -_ The absolute time field is an absolute timestamp given by the clock since - it started. A snapshot of this time is given on each entry/exit of functions +- The absolute time field is an absolute timestamp given by the + system clock since it started. A snapshot of this time is + given on each entry/exit of functions hide: echo nofuncgraph-abstime > /debug/tracing/trace_options show: echo funcgraph-abstime > /debug/tracing/trace_options @@ -1377,9 +1465,10 @@ _ The absolute time field is an absolute timestamp given by the clock since 360.774530 | 1) 0.594 us | __phys_addr(); -You can put some comments on specific functions by using ftrace_printk() -For example, if you want to put a comment inside the __might_sleep() function, -you just have to include and call ftrace_printk() inside __might_sleep() +You can put some comments on specific functions by using +ftrace_printk() For example, if you want to put a comment inside +the __might_sleep() function, you just have to include + and call ftrace_printk() inside __might_sleep() ftrace_printk("I'm a comment!\n") @@ -1390,8 +1479,9 @@ will produce: 1) 1.449 us | } -You might find other useful features for this tracer on the "dynamic ftrace" -section such as tracing only specific functions or tasks. +You might find other useful features for this tracer in the +following "dynamic ftrace" section such as tracing only specific +functions or tasks. dynamic ftrace -------------- @@ -1399,43 +1489,45 @@ dynamic ftrace If CONFIG_DYNAMIC_FTRACE is set, the system will run with virtually no overhead when function tracing is disabled. The way this works is the mcount function call (placed at the start of -every kernel function, produced by the -pg switch in gcc), starts -of pointing to a simple return. (Enabling FTRACE will include the --pg switch in the compiling of the kernel.) +every kernel function, produced by the -pg switch in gcc), +starts of pointing to a simple return. (Enabling FTRACE will +include the -pg switch in the compiling of the kernel.) At compile time every C file object is run through the recordmcount.pl script (located in the scripts directory). This script will process the C object using objdump to find all the -locations in the .text section that call mcount. (Note, only -the .text section is processed, since processing other sections -like .init.text may cause races due to those sections being freed). +locations in the .text section that call mcount. (Note, only the +.text section is processed, since processing other sections like +.init.text may cause races due to those sections being freed). -A new section called "__mcount_loc" is created that holds references -to all the mcount call sites in the .text section. This section is -compiled back into the original object. The final linker will add -all these references into a single table. +A new section called "__mcount_loc" is created that holds +references to all the mcount call sites in the .text section. +This section is compiled back into the original object. The +final linker will add all these references into a single table. On boot up, before SMP is initialized, the dynamic ftrace code -scans this table and updates all the locations into nops. It also -records the locations, which are added to the available_filter_functions -list. Modules are processed as they are loaded and before they are -executed. When a module is unloaded, it also removes its functions from -the ftrace function list. This is automatic in the module unload -code, and the module author does not need to worry about it. - -When tracing is enabled, kstop_machine is called to prevent races -with the CPUS executing code being modified (which can cause the -CPU to do undesireable things), and the nops are patched back -to calls. But this time, they do not call mcount (which is just -a function stub). They now call into the ftrace infrastructure. +scans this table and updates all the locations into nops. It +also records the locations, which are added to the +available_filter_functions list. Modules are processed as they +are loaded and before they are executed. When a module is +unloaded, it also removes its functions from the ftrace function +list. This is automatic in the module unload code, and the +module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent +races with the CPUS executing code being modified (which can +cause the CPU to do undesireable things), and the nops are +patched back to calls. But this time, they do not call mcount +(which is just a function stub). They now call into the ftrace +infrastructure. One special side-effect to the recording of the functions being traced is that we can now selectively choose which functions we -wish to trace and which ones we want the mcount calls to remain as -nops. +wish to trace and which ones we want the mcount calls to remain +as nops. -Two files are used, one for enabling and one for disabling the tracing -of specified functions. They are: +Two files are used, one for enabling and one for disabling the +tracing of specified functions. They are: set_ftrace_filter @@ -1443,8 +1535,8 @@ and set_ftrace_notrace -A list of available functions that you can add to these files is listed -in: +A list of available functions that you can add to these files is +listed in: available_filter_functions @@ -1481,8 +1573,8 @@ hrtimer_interrupt sys_nanosleep -Perhaps this is not enough. The filters also allow simple wild cards. -Only the following are currently available +Perhaps this is not enough. The filters also allow simple wild +cards. Only the following are currently available * - will match functions that begin with * - will match functions that end with @@ -1492,9 +1584,9 @@ These are the only wild cards which are supported. * will not work. -Note: It is better to use quotes to enclose the wild cards, otherwise - the shell may expand the parameters into names of files in the local - directory. +Note: It is better to use quotes to enclose the wild cards, + otherwise the shell may expand the parameters into names + of files in the local directory. # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter @@ -1540,7 +1632,8 @@ This is because the '>' and '>>' act just like they do in bash. To rewrite the filters, use '>' To append to the filters, use '>>' -To clear out a filter so that all functions will be recorded again: +To clear out a filter so that all functions will be recorded +again: # echo > /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter @@ -1572,7 +1665,8 @@ hrtimer_get_res hrtimer_init_sleeper -The set_ftrace_notrace prevents those functions from being traced. +The set_ftrace_notrace prevents those functions from being +traced. # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace @@ -1595,18 +1689,20 @@ Produces: We can see that there's no more lock or preempt tracing. -* Dynamic ftrace with the function graph tracer * +Dynamic ftrace with the function graph tracer +--------------------------------------------- +Although what has been explained above concerns both the +function tracer and the function-graph-tracer, there are some +special features only available in the function-graph tracer. -Although what has been explained above concerns both the function tracer and -the function_graph_tracer, the following concerns only the latter. +If you want to trace only one function and all of its children, +you just have to echo its name into set_graph_function: -If you want to trace only one function and all of its childs, you just have -to echo its name on set_graph_function: + echo __do_fault > set_graph_function -echo __do_fault > set_graph_function - -will produce the following: +will produce the following "expanded" trace of the __do_fault() +function: 0) | __do_fault() { 0) | filemap_fault() { @@ -1643,23 +1739,24 @@ will produce the following: 0) 2.793 us | } 0) + 14.012 us | } -You can also select several functions: +You can also expand several functions at once: -echo sys_open > set_graph_function -echo sys_close >> set_graph_function + echo sys_open > set_graph_function + echo sys_close >> set_graph_function -Now if you want to go back to trace all functions +Now if you want to go back to trace all functions you can clear +this special filter via: -echo > set_graph_function + echo > set_graph_function trace_pipe ---------- -The trace_pipe outputs the same content as the trace file, but the effect -on the tracing is different. Every read from trace_pipe is consumed. -This means that subsequent reads will be different. The trace -is live. +The trace_pipe outputs the same content as the trace file, but +the effect on the tracing is different. Every read from +trace_pipe is consumed. This means that subsequent reads will be +different. The trace is live. # echo function > /debug/tracing/current_tracer # cat /debug/tracing/trace_pipe > /tmp/trace.out & @@ -1687,38 +1784,45 @@ is live. bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up -Note, reading the trace_pipe file will block until more input is added. -By changing the tracer, trace_pipe will issue an EOF. We needed -to set the function tracer _before_ we "cat" the trace_pipe file. +Note, reading the trace_pipe file will block until more input is +added. By changing the tracer, trace_pipe will issue an EOF. We +needed to set the function tracer _before_ we "cat" the +trace_pipe file. trace entries ------------- -Having too much or not enough data can be troublesome in diagnosing -an issue in the kernel. The file buffer_size_kb is used to modify -the size of the internal trace buffers. The number listed -is the number of entries that can be recorded per CPU. To know -the full size, multiply the number of possible CPUS with the -number of entries. +Having too much or not enough data can be troublesome in +diagnosing an issue in the kernel. The file buffer_size_kb is +used to modify the size of the internal trace buffers. The +number listed is the number of entries that can be recorded per +CPU. To know the full size, multiply the number of possible CPUS +with the number of entries. # cat /debug/tracing/buffer_size_kb 1408 (units kilobytes) -Note, to modify this, you must have tracing completely disabled. To do that, -echo "nop" into the current_tracer. If the current_tracer is not set -to "nop", an EINVAL error will be returned. +Note, to modify this, you must have tracing completely disabled. +To do that, echo "nop" into the current_tracer. If the +current_tracer is not set to "nop", an EINVAL error will be +returned. # echo nop > /debug/tracing/current_tracer # echo 10000 > /debug/tracing/buffer_size_kb # cat /debug/tracing/buffer_size_kb 10000 (units kilobytes) -The number of pages which will be allocated is limited to a percentage -of available memory. Allocating too much will produce an error. +The number of pages which will be allocated is limited to a +percentage of available memory. Allocating too much will produce +an error. # echo 1000000000000 > /debug/tracing/buffer_size_kb -bash: echo: write error: Cannot allocate memory # cat /debug/tracing/buffer_size_kb 85 +----------- + +More details can be found in the source code, in the +kernel/tracing/*.c files.