From: Mark Brown <broonie@sirena.org.uk>
Date: Thu, 19 Jun 2008 02:11:49 +0000 (+0100)
Subject: [ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSP
X-Git-Tag: v2.6.27-rc1~850^2^2~13^2
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=54b238469bce3a1b5012b2f0ebf261cf1c53e664;p=linux-2.6-omap-h63xx.git

[ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSP

Also add some white space for a little clarity.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
index 0255328c3c1..3c04cde2cf1 100644
--- a/include/asm-arm/arch-pxa/regs-ssp.h
+++ b/include/asm-arm/arch-pxa/regs-ssp.h
@@ -20,6 +20,10 @@
 #define SSTSS		(0x38)  /* SSP Timeslot Status */
 #define SSACD		(0x3C)  /* SSP Audio Clock Divider */
 
+#if defined(CONFIG_PXA3xx)
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+#endif
+
 /* Common PXA2xx bits first */
 #define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
 #define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
@@ -29,10 +33,12 @@
 #define SSCR0_National	(0x2 << 4)	/* National Microwire */
 #define SSCR0_ECS	(1 << 6)	/* External clock select */
 #define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+
 #if defined(CONFIG_PXA25x)
 #define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x)
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
@@ -45,6 +51,10 @@
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#endif
+
 #define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
 #define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
 #define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
@@ -109,5 +119,9 @@
 #define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
 #define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#endif
+
 
 #endif /* __ASM_ARCH_REGS_SSP_H */