From: Alan Cox Date: Mon, 27 Mar 2006 17:58:20 +0000 (+0100) Subject: [PATCH] libata: Simplex and other mode filtering logic X-Git-Tag: v2.6.17-rc1~146^2~3 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=5444a6f405618706eddbe1605ef8533b1b655764;p=linux-2.6-omap-h63xx.git [PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index d260d92089a..5bcbb6ee3bc 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -120,14 +120,27 @@ void (*dev_config) (struct ata_port *, struct ata_device *); void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); -void (*post_set_mode) (struct ata_port *ap); +void (*post_set_mode) (struct ata_port *); +unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int); Hooks called prior to the issue of SET FEATURES - XFER MODE - command. dev->pio_mode is guaranteed to be valid when - ->set_piomode() is called, and dev->dma_mode is guaranteed to be - valid when ->set_dmamode() is called. ->post_set_mode() is + command. The optional ->mode_filter() hook is called when libata + has built a mask of the possible modes. This is passed to the + ->mode_filter() function which should return a mask of valid modes + after filtering those unsuitable due to hardware limits. It is not + valid to use this interface to add modes. + + + dev->pio_mode and dev->dma_mode are guaranteed to be valid when + ->set_piomode() and when ->set_dmamode() is called. The timings for + any other drive sharing the cable will also be valid at this point. + That is the library records the decisions for the modes of each + drive on a channel before it attempts to set any of them. + + + ->post_set_mode() is called unconditionally, after the SET FEATURES - XFER MODE command completes successfully. @@ -230,6 +243,32 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); + Private tuning method + +void (*set_mode) (struct ata_port *ap); + + + + By default libata performs drive and controller tuning in + accordance with the ATA timing rules and also applies blacklists + and cable limits. Some controllers need special handling and have + custom tuning rules, typically raid controllers that use ATA + commands but do not actually do drive timing. + + + + + This hook should not be used to replace the standard controller + tuning logic when a controller has quirks. Replacing the default + tuning logic in that case would bypass handling for drive and + bridge quirks that may be important to data reliability. If a + controller needs to filter the mode selection it should use the + mode_filter hook instead. + + + + + Reset ATA bus void (*phy_reset) (struct ata_port *ap); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 41659448a20..b1ddf40533b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1818,7 +1818,7 @@ static void ata_host_set_dma(struct ata_port *ap) */ static void ata_set_mode(struct ata_port *ap) { - int i, rc; + int i, rc, used_dma = 0; /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -1836,6 +1836,9 @@ static void ata_set_mode(struct ata_port *ap) dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); dev->pio_mode = ata_xfer_mask2mode(pio_mask); dev->dma_mode = ata_xfer_mask2mode(dma_mask); + + if (dev->dma_mode) + used_dma = 1; } /* step 2: always set host PIO timings */ @@ -1857,6 +1860,17 @@ static void ata_set_mode(struct ata_port *ap) goto err_out; } + /* + * Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. + */ + + if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) + ap->host_set->simplex_claimed = 1; + + /* + * Chip specific finalisation + */ if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); @@ -2646,13 +2660,14 @@ static int ata_dma_blacklisted(const struct ata_device *dev) */ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) { + struct ata_host_set *hs = ap->host_set; unsigned long xfer_mask; int i; xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - /* use port-wide xfermask for now */ + /* FIXME: Use port-wide xfermask for now */ for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *d = &ap->device[i]; if (!ata_dev_present(d)) @@ -2662,12 +2677,23 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) xfer_mask &= ata_id_xfermask(d->id); if (ata_dma_blacklisted(d)) xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + /* Apply cable rule here. Don't apply it early because when + we handle hot plug the cable type can itself change */ + if (ap->cbl == ATA_CBL_PATA40) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); } if (ata_dma_blacklisted(dev)) printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " "disabling DMA\n", ap->id, dev->devno); + if (hs->flags & ATA_HOST_SIMPLEX) { + if (hs->simplex_claimed) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + } + if (ap->ops->mode_filter) + xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, &dev->udma_mask); } @@ -4531,6 +4557,7 @@ int ata_device_add(const struct ata_probe_ent *ent) host_set->mmio_base = ent->mmio_base; host_set->private_data = ent->private_data; host_set->ops = ent->port_ops; + host_set->flags = ent->host_set_flags; /* register each port bound to this device */ for (i = 0; i < ent->n_ports; i++) { diff --git a/include/linux/libata.h b/include/linux/libata.h index 6a9316cbb70..0d61357604d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -294,6 +294,9 @@ struct ata_host_set { unsigned int n_ports; void *private_data; const struct ata_port_operations *ops; + unsigned long flags; + int simplex_claimed; /* Keep seperate in case we + ever need to do this locked */ struct ata_port * ports[0]; }; @@ -423,6 +426,7 @@ struct ata_port_operations { void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); + unsigned long (*mode_filter) (const struct ata_port *, struct ata_device *, unsigned long); void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);