From: Jeff Morrow Date: Fri, 16 Feb 2007 09:42:27 +0000 (-0800) Subject: bugfixes and new hardware support for arcnet driver X-Git-Tag: v2.6.21-rc1~74^2~10 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=52edc17f94f7bd4d9a66bb13d9142f4072c7a82d;p=linux-2.6-omap-h63xx.git bugfixes and new hardware support for arcnet driver The modifications and bug fixes noted below were done by Realtime Control Works and Contemporary Control Systems, Inc, Jan 2005. They were incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb 2007. The changes have been tested on a Contemporary Controls PCI20U-4000. Summary of changes: Arc-rawmode.c: rx(): - Fixed error in received packet lengths; 256 byte packets were being received as 257 bytes packets. prepare_tx(): - Fixed error in transmit length calcs; 257 byte packets were being transmitted as 260 byte packets. com20020.c: com20020_check(): - We now load the SETUP2 register if the 'clockm' parameter is non-zero, instead of checking for ARC_CAN_10MBIT. The user is now responsible for whether or not SETUP2 is loaded. If the clock multiplier is non-zero, this means that the user wants a baud rate greater than 2.5Mbps. This is not possible unless the SETUP2 register is present (COM20020D, or COM20022). So, we're relying on the user to be smart about what kind of chip he's dealing with... com20020-pci.c - Added several entries to com20020pci_id_table[]. Signed-off-by: Jeff Morrow Cc: "David S. Miller" Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c index e7555d4e6ff..6318814a11a 100644 --- a/drivers/net/arcnet/arc-rawmode.c +++ b/drivers/net/arcnet/arc-rawmode.c @@ -94,7 +94,7 @@ static void rx(struct net_device *dev, int bufnum, BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length); - if (length >= MinTU) + if (length > MTU) ofs = 512 - length; else ofs = 256 - length; @@ -183,7 +183,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, length, XMTU); length = XMTU; } - if (length > MinTU) { + if (length >= MinTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length; } else if (length > MTU) { diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 4e91dab1f17..83004fdab0a 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -41,7 +41,7 @@ * */ -#define VERSION "arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.\n" +#define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n" #include #include diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 98d326b23c9..b8c0fa6d401 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -155,6 +155,7 @@ static struct pci_device_id com20020pci_id_table[] = { { 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, { 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, { 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, + { 0x1571, 0xa00e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, { 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, { 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, { 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, @@ -163,6 +164,8 @@ static struct pci_device_id com20020pci_id_table[] = { { 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, { 0x10B5, 0x9030, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, { 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, + { 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, + { 0x10B5, 0x2200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, {0,} }; diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 4218075c8aa..7cf0a251169 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -104,7 +104,7 @@ int com20020_check(struct net_device *dev) SET_SUBADR(SUB_SETUP1); outb(lp->setup, _XREG); - if (lp->card_flags & ARC_CAN_10MBIT) + if (lp->clockm != 0) { SET_SUBADR(SUB_SETUP2); outb(lp->setup2, _XREG);