From: Daniel Burcaw <dburcaw@terrasoftsolutions.com>
Date: Fri, 9 Sep 2005 20:04:59 +0000 (-0700)
Subject: [PATCH] radeonfb: Only request resources we need
X-Git-Tag: v2.6.14-rc1~312
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=5251bffc9b4ca699993c79166adf02faf1bbc043;p=linux-2.6-omap-h63xx.git

[PATCH] radeonfb: Only request resources we need

This patch changes radeon to request only resources 0 and 2 instead of all
3.  This works around problems with some setups where BAR 1 (IO BAR) has
not been assigned by the firmware since it's not used on the machine and
the kernel fails to assign something to it due to the card being between a
P2P bridge that was configured without an IO range at all.

This typically fixes radeonfb on some Apple Xserve G5 machines

Signed-off-by: Daniel Burcaw <dburcaw@terrasoftsolutions.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index e7e8b52014c..8a7c04c35a7 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2312,19 +2312,27 @@ static int radeonfb_pci_register (struct pci_dev *pdev,
 	rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
 
 	/* request the mem regions */
-	ret = pci_request_regions(pdev, "radeonfb");
+	ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
 	if (ret < 0) {
-		printk( KERN_ERR "radeonfb (%s): cannot reserve PCI regions."
-			"  Someone already got them?\n", pci_name(rinfo->pdev));
+		printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
+			pci_name(rinfo->pdev));
 		goto err_release_fb;
 	}
 
+	ret = pci_request_region(pdev, 2, "radeonfb mmio");
+	if (ret < 0) {
+		printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
+			pci_name(rinfo->pdev));
+		goto err_release_pci0;
+	}
+
 	/* map the regions */
 	rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
 	if (!rinfo->mmio_base) {
-		printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n", pci_name(rinfo->pdev));
+		printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n",
+		       pci_name(rinfo->pdev));
 		ret = -EIO;
-		goto err_release_pci;
+		goto err_release_pci2;
 	}
 
 	rinfo->fb_local_base = INREG(MC_FB_LOCATION) << 16;
@@ -2499,10 +2507,12 @@ err_unmap_rom:
 	if (rinfo->bios_seg)
 		radeon_unmap_ROM(rinfo, pdev);
 	iounmap(rinfo->mmio_base);
-err_release_pci:
-	pci_release_regions(pdev);
+err_release_pci2:
+	pci_release_region(pdev, 2);
+err_release_pci0:
+	pci_release_region(pdev, 0);
 err_release_fb:
-	framebuffer_release(info);
+        framebuffer_release(info);
 err_disable:
 	pci_disable_device(pdev);
 err_out:
@@ -2548,7 +2558,8 @@ static void __devexit radeonfb_pci_unregister (struct pci_dev *pdev)
         iounmap(rinfo->mmio_base);
         iounmap(rinfo->fb_base);
  
- 	pci_release_regions(pdev);
+	pci_release_region(pdev, 2);
+	pci_release_region(pdev, 0);
 
 	kfree(rinfo->mon1_EDID);
 	kfree(rinfo->mon2_EDID);