From: Bartlomiej Zolnierkiewicz Date: Thu, 24 Jul 2008 20:53:16 +0000 (+0200) Subject: siimage: convert to use ->host_priv X-Git-Tag: v2.6.27-rc1~509^2~65 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=4c674235d667d7ddc6b0c95a228a507eb94da2d6;p=linux-2.6-omap-h63xx.git siimage: convert to use ->host_priv While at it: * Reserve PCI BAR 5 in siimage_init_one() and remove no longer needed setup_mmio_siimage(). Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 48124133601..1388ffa9764 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -127,9 +127,10 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) { + struct ide_host *host = pci_get_drvdata(dev); u8 tmp = 0; - if (pci_get_drvdata(dev)) + if (host->host_priv) tmp = readb((void __iomem *)addr); else pci_read_config_byte(dev, addr, &tmp); @@ -139,9 +140,10 @@ static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr) static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) { + struct ide_host *host = pci_get_drvdata(dev); u16 tmp = 0; - if (pci_get_drvdata(dev)) + if (host->host_priv) tmp = readw((void __iomem *)addr); else pci_read_config_word(dev, addr, &tmp); @@ -151,7 +153,9 @@ static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr) static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) { - if (pci_get_drvdata(dev)) + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) writeb(val, (void __iomem *)addr); else pci_write_config_byte(dev, addr, val); @@ -159,7 +163,9 @@ static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr) static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) { - if (pci_get_drvdata(dev)) + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) writew(val, (void __iomem *)addr); else pci_write_config_word(dev, addr, val); @@ -167,7 +173,9 @@ static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr) static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr) { - if (pci_get_drvdata(dev)) + struct ide_host *host = pci_get_drvdata(dev); + + if (host->host_priv) writel(val, (void __iomem *)addr); else pci_write_config_dword(dev, addr, val); @@ -444,44 +452,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive) } } -/** - * setup_mmio_siimage - switch controller into MMIO mode - * @dev: PCI device we are configuring - * @name: device name - * - * Attempt to put the device into MMIO mode. There are some slight - * complications here with certain systems where the MMIO BAR isn't - * mapped, so we have to be sure that we can fall back to I/O. - */ - -static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name) -{ - resource_size_t bar5 = pci_resource_start(dev, 5); - unsigned long barsize = pci_resource_len(dev, 5); - void __iomem *ioaddr; - - /* - * Drop back to PIO if we can't map the MMIO. Some systems - * seem to get terminally confused in the PCI spaces. - */ - if (!request_mem_region(bar5, barsize, name)) { - printk(KERN_WARNING "siimage: IDE controller MMIO ports not " - "available.\n"); - return 0; - } - - ioaddr = ioremap(bar5, barsize); - if (ioaddr == NULL) { - release_mem_region(bar5, barsize); - return 0; - } - - pci_set_master(dev); - pci_set_drvdata(dev, (void *) ioaddr); - - return 1; -} - /** * init_chipset_siimage - set up an SI device * @dev: PCI device @@ -494,17 +464,15 @@ static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name) static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name) { + struct ide_host *host = pci_get_drvdata(dev); + void __iomem *ioaddr = host->host_priv; unsigned long base, scsc_addr; - void __iomem *ioaddr = NULL; - u8 rev = dev->revision, tmp, BA5_EN; + u8 rev = dev->revision, tmp; pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255); - pci_read_config_byte(dev, 0x8A, &BA5_EN); - - if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) - if (setup_mmio_siimage(dev, name)) - ioaddr = pci_get_drvdata(dev); + if (ioaddr) + pci_set_master(dev); base = (unsigned long)ioaddr; @@ -592,7 +560,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - void *addr = pci_get_drvdata(dev); + struct ide_host *host = pci_get_drvdata(dev); + void *addr = host->host_priv; u8 ch = hwif->channel; struct ide_io_ports *io_ports = &hwif->io_ports; unsigned long base; @@ -691,16 +660,15 @@ static void __devinit sil_quirkproc(ide_drive_t *drive) static void __devinit init_iops_siimage(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_host *host = pci_get_drvdata(dev); hwif->hwif_data = NULL; /* Pessimal until we finish probing */ hwif->rqsize = 15; - if (pci_get_drvdata(dev) == NULL) - return; - - init_mmio_iops_siimage(hwif); + if (host->host_priv) + init_mmio_iops_siimage(hwif); } /** @@ -778,8 +746,13 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + void __iomem *ioaddr = NULL; + resource_size_t bar5 = pci_resource_start(dev, 5); + unsigned long barsize = pci_resource_len(dev, 5); + int rc; struct ide_port_info d; u8 idx = id->driver_data; + u8 BA5_EN; d = siimage_chipsets[idx]; @@ -795,7 +768,36 @@ static int __devinit siimage_init_one(struct pci_dev *dev, d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; } - return ide_pci_init_one(dev, &d, NULL); + rc = pci_enable_device(dev); + if (rc) + return rc; + + pci_read_config_byte(dev, 0x8A, &BA5_EN); + if ((BA5_EN & 0x01) || bar5) { + /* + * Drop back to PIO if we can't map the MMIO. Some systems + * seem to get terminally confused in the PCI spaces. + */ + if (!request_mem_region(bar5, barsize, d.name)) { + printk(KERN_WARNING "siimage: IDE controller MMIO " + "ports not available.\n"); + } else { + ioaddr = ioremap(bar5, barsize); + if (ioaddr == NULL) + release_mem_region(bar5, barsize); + } + } + + rc = ide_pci_init_one(dev, &d, ioaddr); + if (rc) { + if (ioaddr) { + iounmap(ioaddr); + release_mem_region(bar5, barsize); + } + pci_disable_device(dev); + } + + return rc; } static const struct pci_device_id siimage_pci_tbl[] = {