From: Ursula Braun Date: Fri, 10 Oct 2008 19:33:04 +0000 (+0200) Subject: [S390] qdio: speed up multicast traffic on full HiperSocket queue X-Git-Tag: v2.6.28-rc1~721^2~26 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=4bcb3a37180ee4dffaef8298f373b334a7bedabb;p=linux-2.6-omap-h63xx.git [S390] qdio: speed up multicast traffic on full HiperSocket queue If an asynchronous HiperSockets queue runs full, no further packet can be sent. In this case the next initiative to give transmitted skbs back to the stack is triggered only by a 10-seconds qdio timer. This timer has been introduced for low multicast traffic scenarios to guarantee freeing of skbs in a limited amount of time. For high HiperSocket multicast traffic scenarios progress checking on the outbound queue should be enforced by tasklet rescheduling. Signed-off-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index c1a70985abf..af867731a5f 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -16,6 +16,14 @@ #define QDIO_BUSY_BIT_GIVE_UP 2000000 /* 2 seconds = eternity */ #define QDIO_INPUT_THRESHOLD 500 /* 500 microseconds */ +/* + * if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait + * till next initiative to give transmitted skbs back to the stack is too long. + * Therefore polling is started in case of multicast queue is filled more + * than 50 percent. + */ +#define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */ + enum qdio_irq_states { QDIO_IRQ_STATE_INACTIVE, QDIO_IRQ_STATE_ESTABLISHED, diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index e6eabc85342..9307512132f 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -851,6 +851,12 @@ static void __qdio_outbound_processing(struct qdio_q *q) if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) return; + if ((queue_type(q) == QDIO_IQDIO_QFMT) && + (atomic_read(&q->nr_buf_used)) > QDIO_IQDIO_POLL_LVL) { + tasklet_schedule(&q->tasklet); + return; + } + if (q->u.out.pci_out_enabled) return;