From: Jean Delvare Date: Mon, 3 Dec 2007 22:23:21 +0000 (+0100) Subject: hwmon: (lm85) Return standard values in pwmN_enable X-Git-Tag: v2.6.25-rc1~281^2~19 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=4b4df95dccdd2c6a573c9dedefb747ed663c074d;p=linux-2.6-omap-h63xx.git hwmon: (lm85) Return standard values in pwmN_enable The values returned by the lm85 driver in pwmN_enable sysfs files do not match the standard. Fix that. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index a02480be65f..194b8fb52f0 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -519,10 +519,21 @@ static ssize_t show_pwm_enable(struct device *dev, struct device_attribute { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - int pwm_zone; + int pwm_zone, enable; pwm_zone = ZONE_FROM_REG(data->autofan[nr].config); - return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) ); + switch (pwm_zone) { + case -1: /* PWM is always at 100% */ + enable = 0; + break; + case 0: /* PWM is always at 0% */ + case -2: /* PWM responds to manual control */ + enable = 1; + break; + default: /* PWM in automatic mode */ + enable = 2; + } + return sprintf(buf, "%d\n", enable); } #define show_pwm_reg(offset) \