From: adam radford Date: Thu, 22 Sep 2005 00:20:14 +0000 (-0700) Subject: [SCSI] 3ware 9000: Add support for 9550SX controllers X-Git-Tag: v2.6.14-rc4~84^2~14 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=49bfd8db4a39ea14fb3780b162012b4b3611fce8;p=linux-2.6-omap-h63xx.git [SCSI] 3ware 9000: Add support for 9550SX controllers Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index a6ac61611f3..a748fbfb669 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -60,6 +60,7 @@ Remove un-needed eh_abort handler. Add support for embedded firmware error strings. 2.26.02.003 - Correctly handle single sgl's with use_sg=1. + 2.26.02.004 - Add support for 9550SX controllers. */ #include @@ -82,7 +83,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.003" +#define TW_DRIVER_VERSION "2.26.02.004" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -892,11 +893,6 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value) writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); } - if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) { - TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "SBUF Write Error: clearing"); - writel(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); - } - if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) { if (tw_dev->reset_print == 0) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing"); @@ -930,6 +926,36 @@ out: return retval; } /* End twa_empty_response_queue() */ +/* This function will clear the pchip/response queue on 9550SX */ +static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev) +{ + u32 status_reg_value, response_que_value; + int count = 0, retval = 1; + + if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) { + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + + while (((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) && (count < TW_MAX_RESPONSE_DRAIN)) { + response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev)); + if ((response_que_value & TW_9550SX_DRAIN_COMPLETED) == TW_9550SX_DRAIN_COMPLETED) { + /* P-chip settle time */ + msleep(500); + retval = 0; + goto out; + } + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + count++; + } + if (count == TW_MAX_RESPONSE_DRAIN) + goto out; + + retval = 0; + } else + retval = 0; +out: + return retval; +} /* End twa_empty_response_queue_large() */ + /* This function passes sense keys from firmware to scsi layer */ static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host) { @@ -1613,8 +1639,16 @@ static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) int tries = 0, retval = 1, flashed = 0, do_soft_reset = soft_reset; while (tries < TW_MAX_RESET_TRIES) { - if (do_soft_reset) + if (do_soft_reset) { TW_SOFT_RESET(tw_dev); + /* Clear pchip/response queue on 9550SX */ + if (twa_empty_response_queue_large(tw_dev)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence"); + do_soft_reset = 1; + tries++; + continue; + } + } /* Make sure controller is in a good state */ if (twa_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY | (do_soft_reset == 1 ? TW_STATUS_ATTENTION_INTERRUPT : 0), 60)) { @@ -2034,7 +2068,10 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id goto out_free_device_extension; } - mem_addr = pci_resource_start(pdev, 1); + if (pdev->device == PCI_DEVICE_ID_3WARE_9000) + mem_addr = pci_resource_start(pdev, 1); + else + mem_addr = pci_resource_start(pdev, 2); /* Save base address */ tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE); @@ -2148,6 +2185,8 @@ static void twa_remove(struct pci_dev *pdev) static struct pci_device_id twa_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { } }; MODULE_DEVICE_TABLE(pci, twa_pci_tbl); diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 8c8ecbed3b5..46f22cdc829 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -267,7 +267,6 @@ static twa_message_type twa_error_table[] = { #define TW_CONTROL_CLEAR_PARITY_ERROR 0x00800000 #define TW_CONTROL_CLEAR_QUEUE_ERROR 0x00400000 #define TW_CONTROL_CLEAR_PCI_ABORT 0x00100000 -#define TW_CONTROL_CLEAR_SBUF_WRITE_ERROR 0x00000008 /* Status register bit definitions */ #define TW_STATUS_MAJOR_VERSION_MASK 0xF0000000 @@ -285,9 +284,8 @@ static twa_message_type twa_error_table[] = { #define TW_STATUS_MICROCONTROLLER_READY 0x00002000 #define TW_STATUS_COMMAND_QUEUE_EMPTY 0x00001000 #define TW_STATUS_EXPECTED_BITS 0x00002000 -#define TW_STATUS_UNEXPECTED_BITS 0x00F00008 -#define TW_STATUS_SBUF_WRITE_ERROR 0x00000008 -#define TW_STATUS_VALID_INTERRUPT 0x00DF0008 +#define TW_STATUS_UNEXPECTED_BITS 0x00F00000 +#define TW_STATUS_VALID_INTERRUPT 0x00DF0000 /* RESPONSE QUEUE BIT DEFINITIONS */ #define TW_RESPONSE_ID_MASK 0x00000FF0 @@ -324,9 +322,9 @@ static twa_message_type twa_error_table[] = { /* Compatibility defines */ #define TW_9000_ARCH_ID 0x5 -#define TW_CURRENT_DRIVER_SRL 28 -#define TW_CURRENT_DRIVER_BUILD 9 -#define TW_CURRENT_DRIVER_BRANCH 4 +#define TW_CURRENT_DRIVER_SRL 30 +#define TW_CURRENT_DRIVER_BUILD 80 +#define TW_CURRENT_DRIVER_BRANCH 0 /* Phase defines */ #define TW_PHASE_INITIAL 0 @@ -334,6 +332,7 @@ static twa_message_type twa_error_table[] = { #define TW_PHASE_SGLIST 2 /* Misc defines */ +#define TW_9550SX_DRAIN_COMPLETED 0xFFFF #define TW_SECTOR_SIZE 512 #define TW_ALIGNMENT_9000 4 /* 4 bytes */ #define TW_ALIGNMENT_9000_SGL 0x3 @@ -417,6 +416,9 @@ static twa_message_type twa_error_table[] = { #ifndef PCI_DEVICE_ID_3WARE_9000 #define PCI_DEVICE_ID_3WARE_9000 0x1002 #endif +#ifndef PCI_DEVICE_ID_3WARE_9550SX +#define PCI_DEVICE_ID_3WARE_9550SX 0x1003 +#endif /* Bitmask macros to eliminate bitfields */ @@ -443,6 +445,7 @@ static twa_message_type twa_error_table[] = { #define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4) #define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8)) #define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC) +#define TW_RESPONSE_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x30) #define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x))) #define TW_CLEAR_ATTENTION_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT, TW_CONTROL_REG_ADDR(x))) #define TW_CLEAR_HOST_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_HOST_INTERRUPT, TW_CONTROL_REG_ADDR(x)))