From: Auke Kok Date: Thu, 21 Feb 2008 23:11:07 +0000 (-0800) Subject: e1000e: fix spelling errors in comments X-Git-Tag: v2.6.25-rc4~148^2~41^2~1 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=489815ce224e75c2fcd5ebdfaa740d7f9a4f20d3;p=linux-2.6-omap-h63xx.git e1000e: fix spelling errors in comments Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index f7ffd35c8a4..7fe20310eb5 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw) * For non-82573 silicon, write data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) * poll for completion. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback - * mode. This prevents drivers from twidling their thumbs + * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ ew32(SCTL, @@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) * e1000e_get_laa_state_82571 - Get locally administered address state * @hw: pointer to the HW structure * - * Retrieve and return the current locally administed address state. + * Retrieve and return the current locally administered address state. **/ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { @@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administed address state. + * Enable/Disable the current locally administers address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 6232c3e9668..a4f511f549f 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -66,7 +66,7 @@ #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ /* Extended Device Control */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -75,12 +75,12 @@ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ @@ -223,7 +223,7 @@ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to intrepret the masked PCI-X bus speed. */ +/* Constants used to interpret the masked PCI-X bus speed. */ #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -517,7 +517,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 3c5862f97db..916025b30fc 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -184,7 +184,7 @@ enum e1e_registers { E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control*/ + E1000_RFCTL = 0x05008, /* Receive Filter Control */ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ E1000_RA = 0x05400, /* Receive Address - RW Array */ E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ @@ -202,7 +202,7 @@ enum e1e_registers { E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_HICR = 0x08F00, /* Host Inteface Control */ + E1000_HICR = 0x08F00, /* Host Interface Control */ }; /* RSS registers */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 8f8139de1f4..0ae39550768 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY * @hw: pointer to the HW structure * - * Polarity is determined on the polarity reveral feature being enabled. + * Polarity is determined on the polarity reversal feature being enabled. * This function is only called by other family-specific * routines. **/ @@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it - * is 1 after harware reset, which can then be used as an + * is 1 after hardware reset, which can then be used as an * indication whether a cycle is in progress or has been * completed. */ @@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, * which writes the checksum to the shadow ram. The changes in the shadow * ram are then committed to the EEPROM by processing each bank at a time * checking for the modified bit and writing only the pending changes. - * After a succesful commit, the shadow ram is cleared and is ready for + * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) @@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * - initialize LED identification * - setup receive address registers * - setup flow control - * - setup transmit discriptors + * - setup transmit descriptors * - clear statistics **/ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) @@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on Giga disable before accessing + /* Call gig speed drop workaround on Gig disable before accessing * any PHY registers */ e1000e_gig_downshift_workaround_ich8lan(hw); @@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) /** * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure - * @state: boolean value used to set the current Kumaran workaround state + * @state: boolean value used to set the current Kumeran workaround state * * If ICH8, set the current Kumeran workaround state (enabled - TRUE * /disabled - FALSE). @@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* Call gig speed drop workaround on Giga disable before + /* Call gig speed drop workaround on Gig disable before * accessing any PHY registers */ if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); @@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), - * LPLU, Giga disable, MDIC PHY reset): + * LPLU, Gig disable, MDIC PHY reset): * 1) Set Kumeran Near-end loopback * 2) Clear Kumeran Near-end loopback * Should only be called for ICH8[m] devices with IGP_3 Phy. @@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_on_ich8lan - Turn LED's on + * e1000_led_on_ich8lan - Turn LEDs on * @hw: pointer to the HW structure * - * Turn on the LED's. + * Turn on the LEDs. **/ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) { @@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_off_ich8lan - Turn LED's off + * e1000_led_off_ich8lan - Turn LEDs off * @hw: pointer to the HW structure * - * Turn off the LED's. + * Turn off the LEDs. **/ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 341d74e81fb..95f75a43c9f 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1140,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } /** - * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1176,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup } /** - * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1386,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) * e1000e_blink_led - Blink LED * @hw: pointer to the HW structure * - * Blink the led's which are set to be on. + * Blink the LEDs which are set to be on. **/ s32 e1000e_blink_led(struct e1000_hw *hw) { @@ -1491,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) * @hw: pointer to the HW structure * * Returns 0 if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused * the master requests to be disabled. * * Disables PCI-Express master access and verifies there are no pending @@ -1852,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } /** - * e1000e_read_nvm_spi - Read EEPROM's using SPI + * e1000e_read_nvm_spi - Reads EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -1956,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * Writes data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function , the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { @@ -2198,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length) * * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND * - * This function checks whether the HOST IF is enabled for command operaton + * This function checks whether the HOST IF is enabled for command operation * and also checks whether the previous command is completed. It busy waits * in case of previous command is not completed. **/ @@ -2230,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } /** - * e1000e_check_mng_mode - check managament mode + * e1000e_check_mng_mode - check management mode * @hw: pointer to the HW structure * * Reads the firmware semaphore register and returns true (>0) if diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3031d6d1624..7824bc2993a 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) * e1000_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. @@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) * e1000_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. @@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, @@ -1366,6 +1367,7 @@ set_itr_now: /** * e1000_clean - NAPI Rx polling callback * @adapter: board private structure + * @budget: amount of packets driver is allowed to process this poll **/ static int e1000_clean(struct napi_struct *napi, int budget) { @@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) e1000_check_reset_block(hw)) return; - /* managebility (AMT) is enabled */ + /* manageability (AMT) is enabled */ if (er32(MANC) & E1000_MANC_SMBUS_EN) return; diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index fc6fee112f1..dab3c468a76 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) * @offset: register offset to be read * @data: pointer to the read data * - * Reads the MDI control regsiter in the PHY at offset and stores the + * Reads the MDI control register in the PHY at offset and stores the * information read to data. **/ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) @@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) } /** - * e1000e_check_downshift - Checks whether a downshift in speed occured + * e1000e_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) * * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the - * cable. By reading the AGC registers, which reperesent the - * cobination of course and fine gain value, the value can be put + * cable. By reading the AGC registers, which represent the + * combination of course and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) * Verify the reset block is not blocking us from resetting. Acquire * semaphore (if necessary) and read/set/write the device control reset * bit in the PHY. Wait the appropriate delay time for the device to - * reset and relase the semaphore (if necessary). + * reset and release the semaphore (if necessary). **/ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) {