From: Michael Chan Date: Wed, 10 Oct 2007 23:16:31 +0000 (-0700) Subject: [BNX2]: Fix remote PHY media detection problems. X-Git-Tag: v2.6.24-rc1~1454^2~34 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=489310a440e606512b1fd79d8562d1da6b715448;p=linux-2.6-omap-h63xx.git [BNX2]: Fix remote PHY media detection problems. The remote PHY media type and link status can change between ->probe() and ->open(). For correct operation, we need to get the new status again during ->open(). The ethtool link test and loopback test are also fixed to work with remote PHY. PHY loopback is simply skipped when remote PHY is present. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 0e4928c751f..21493e0cbd4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3776,12 +3776,6 @@ bnx2_init_remote_phy(struct bnx2 *bp) return; if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) { - if (netif_running(bp->dev)) { - val = BNX2_DRV_ACK_CAP_SIGNATURE | - BNX2_FW_CAP_REMOTE_PHY_CAPABLE; - REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB, - val); - } bp->phy_flags |= REMOTE_PHY_CAP_FLAG; val = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS); @@ -3789,6 +3783,22 @@ bnx2_init_remote_phy(struct bnx2 *bp) bp->phy_port = PORT_FIBRE; else bp->phy_port = PORT_TP; + + if (netif_running(bp->dev)) { + u32 sig; + + if (val & BNX2_LINK_STATUS_LINK_UP) { + bp->link_up = 1; + netif_carrier_on(bp->dev); + } else { + bp->link_up = 0; + netif_carrier_off(bp->dev); + } + sig = BNX2_DRV_ACK_CAP_SIGNATURE | + BNX2_FW_CAP_REMOTE_PHY_CAPABLE; + REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB, + sig); + } } } @@ -3797,6 +3807,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) { u32 val; int i, rc = 0; + u8 old_port; /* Wait for the current PCI transaction to complete before * issuing a reset. */ @@ -3875,8 +3886,9 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) return rc; spin_lock_bh(&bp->phy_lock); + old_port = bp->phy_port; bnx2_init_remote_phy(bp); - if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) + if ((bp->phy_flags & REMOTE_PHY_CAP_FLAG) && old_port != bp->phy_port) bnx2_set_default_remote_link(bp); spin_unlock_bh(&bp->phy_lock); @@ -4565,6 +4577,9 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) bnx2_set_mac_loopback(bp); } else if (loopback_mode == BNX2_PHY_LOOPBACK) { + if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) + return 0; + bp->loopback = PHY_LOOPBACK; bnx2_set_phy_loopback(bp); } @@ -4733,6 +4748,11 @@ bnx2_test_link(struct bnx2 *bp) { u32 bmsr; + if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) { + if (bp->link_up) + return 0; + return -ENODEV; + } spin_lock_bh(&bp->phy_lock); bnx2_enable_bmsr1(bp); bnx2_read_phy(bp, bp->mii_bmsr1, &bmsr);