From: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>
Date: Thu, 16 Aug 2007 11:45:00 +0000 (+0200)
Subject: [AVR32] Platform code for pata_at32
X-Git-Tag: v2.6.24-rc1~33^2~5
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=48021bd93ca339fcafe9b043d05f5d3a58be7c0a;p=linux-2.6-omap-h63xx.git

[AVR32] Platform code for pata_at32

This patch adds platform code for PATA devices on the AP7000.

[hskinnemoen@atmel.com: board code left out for now since stk1000
	doesn't support IDE out of the box]
Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---

diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index f6d154ca4d2..30aedc9473f 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -1227,6 +1227,71 @@ out_free_pdev:
 	return NULL;
 }
 
+/* --------------------------------------------------------------------
+ * IDE
+ * -------------------------------------------------------------------- */
+static struct ide_platform_data at32_ide0_data;
+static struct resource at32_ide0_resource[] = {
+	{
+		.start	= 0x04000000,
+		.end	= 0x07ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+DEFINE_DEV_DATA(at32_ide, 0);
+
+struct platform_device *__init
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data)
+{
+	struct platform_device *pdev;
+	unsigned int extint_pin;
+
+	switch (extint) {
+	case 0:
+		extint_pin = GPIO_PIN_PB(25);
+		break;
+	case 1:
+		extint_pin = GPIO_PIN_PB(26);
+		break;
+	case 2:
+		extint_pin = GPIO_PIN_PB(27);
+		break;
+	case 3:
+		extint_pin = GPIO_PIN_PB(28);
+		break;
+	default:
+		return NULL;
+	}
+
+	switch (id) {
+	case 0:
+		pdev = &at32_ide0_device;
+		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		data->cs = 4;
+		break;
+	default:
+		return NULL;
+	}
+
+	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+
+	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+	pdev->resource[1].end = pdev->resource[1].start;
+
+	memcpy(pdev->dev.platform_data, data, sizeof(struct ide_platform_data));
+
+	platform_device_register(pdev);
+
+	return pdev;
+}
+
 /* --------------------------------------------------------------------
  *  GCLK
  * -------------------------------------------------------------------- */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index 7dbd603c38c..c18160f29cb 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -44,6 +44,13 @@ struct usba_platform_data {
 struct platform_device *
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
 
+struct ide_platform_data {
+	u8      cs;
+};
+struct platform_device *
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data);
+
 /* depending on what's hooked up, not all SSC pins will be used */
 #define	ATMEL_SSC_TK		0x01
 #define	ATMEL_SSC_TF		0x02