From: Tejun Heo Date: Fri, 2 Feb 2007 07:22:30 +0000 (+0900) Subject: libata: improve ata_down_xfermask_limit() X-Git-Tag: v2.6.21-rc2~25^2~49 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=458337dbb120d33f326e2b19d54eca8cf179b5c0;p=linux-2.6-omap-h63xx.git libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9c54de5addf..249d487c091 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1780,6 +1780,7 @@ int ata_bus_probe(struct ata_port *ap) int tries[ATA_MAX_DEVICES]; int i, rc, down_xfermask; struct ata_device *dev; + int dnxfer_sel; ata_port_probe(ap); @@ -1861,13 +1862,15 @@ int ata_bus_probe(struct ata_port *ap) /* fall through */ default: tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) + dnxfer_sel = ATA_DNXFER_ANY; + if (tries[dev->devno] == 1) + dnxfer_sel = ATA_DNXFER_FORCE_PIO0; + if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel)) tries[dev->devno] = 0; } if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, 1); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0); ata_dev_disable(dev); } @@ -2300,7 +2303,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, /** * ata_down_xfermask_limit - adjust dev xfer masks downward * @dev: Device to adjust xfer masks - * @force_pio0: Force PIO0 + * @sel: ATA_DNXFER_* selector * * Adjust xfer masks of @dev downward. Note that this function * does not apply the change. Invoking ata_set_mode() afterwards @@ -2312,37 +2315,87 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * RETURNS: * 0 on success, negative errno on failure */ -int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) +int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) { - unsigned long xfer_mask; - int highbit; + char buf[32]; + unsigned int orig_mask, xfer_mask; + unsigned int pio_mask, mwdma_mask, udma_mask; + int quiet, highbit; - xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, - dev->udma_mask); + quiet = !!(sel & ATA_DNXFER_QUIET); + sel &= ~ATA_DNXFER_QUIET; - if (!xfer_mask) - goto fail; - /* don't gear down to MWDMA from UDMA, go directly to PIO */ - if (xfer_mask & ATA_MASK_UDMA) - xfer_mask &= ~ATA_MASK_MWDMA; + xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, + dev->udma_mask); + ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask); - highbit = fls(xfer_mask) - 1; - xfer_mask &= ~(1 << highbit); - if (force_pio0) - xfer_mask &= 1 << ATA_SHIFT_PIO; - if (!xfer_mask) - goto fail; + switch (sel) { + case ATA_DNXFER_PIO: + highbit = fls(pio_mask) - 1; + pio_mask &= ~(1 << highbit); + break; + + case ATA_DNXFER_DMA: + if (udma_mask) { + highbit = fls(udma_mask) - 1; + udma_mask &= ~(1 << highbit); + if (!udma_mask) + return -ENOENT; + } else if (mwdma_mask) { + highbit = fls(mwdma_mask) - 1; + mwdma_mask &= ~(1 << highbit); + if (!mwdma_mask) + return -ENOENT; + } + break; + + case ATA_DNXFER_40C: + udma_mask &= ATA_UDMA_MASK_40C; + break; + + case ATA_DNXFER_FORCE_PIO0: + pio_mask &= 1; + case ATA_DNXFER_FORCE_PIO: + mwdma_mask = 0; + udma_mask = 0; + break; + + case ATA_DNXFER_ANY: + /* don't gear down to MWDMA from UDMA, go directly to PIO */ + if (xfer_mask & ATA_MASK_UDMA) + xfer_mask &= ~ATA_MASK_MWDMA; + + highbit = fls(xfer_mask) - 1; + xfer_mask &= ~(1 << highbit); + break; + + default: + BUG(); + } + + xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); + + if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask) + return -ENOENT; + + if (!quiet) { + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + snprintf(buf, sizeof(buf), "%s:%s", + ata_mode_string(xfer_mask), + ata_mode_string(xfer_mask & ATA_MASK_PIO)); + else + snprintf(buf, sizeof(buf), "%s", + ata_mode_string(xfer_mask)); + + ata_dev_printk(dev, KERN_WARNING, + "limiting speed to %s\n", buf); + } ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, &dev->udma_mask); - ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", - ata_mode_string(xfer_mask)); - return 0; - - fail: - return -EINVAL; } static int ata_dev_set_mode(struct ata_device *dev) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 52c85af7fe9..7b61562cdd4 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1276,7 +1276,7 @@ static int ata_eh_speed_down(struct ata_device *dev, int is_io, return ATA_EH_HARDRESET; /* lower transfer mode */ - if (ata_down_xfermask_limit(dev, 0) == 0) + if (ata_down_xfermask_limit(dev, ATA_DNXFER_ANY) == 0) return ATA_EH_SOFTRESET; ata_dev_printk(dev, KERN_ERR, @@ -1965,6 +1965,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, struct ata_eh_context *ehc = &ap->eh_context; struct ata_device *dev; int down_xfermask, i, rc; + int dnxfer_sel; DPRINTK("ENTER\n"); @@ -2064,8 +2065,10 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, sata_down_spd_limit(ap); default: ehc->tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) + dnxfer_sel = ATA_DNXFER_ANY; + if (ehc->tries[dev->devno] == 1) + dnxfer_sel = ATA_DNXFER_FORCE_PIO0; + if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel)) ehc->tries[dev->devno] = 0; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0ad7781d72a..8533de67d87 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -41,6 +41,16 @@ struct ata_scsi_args { enum { /* flags for ata_dev_read_id() */ ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */ + + /* selector for ata_down_xfermask_limit() */ + ATA_DNXFER_PIO = 0, /* speed down PIO */ + ATA_DNXFER_DMA = 1, /* speed down DMA */ + ATA_DNXFER_40C = 2, /* apply 40c cable limit */ + ATA_DNXFER_FORCE_PIO = 3, /* force PIO */ + ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */ + ATA_DNXFER_ANY = 5, /* speed down any */ + + ATA_DNXFER_QUIET = (1 << 31), }; extern struct workqueue_struct *ata_aux_wq; @@ -69,7 +79,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags); extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); -extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); +extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc);