From: Lennert Buytenhek Date: Thu, 4 Sep 2008 10:22:34 +0000 (+0200) Subject: mv643xx_eth: add support for chips without transmit bandwidth control X-Git-Tag: v2.6.28-rc1~717^2~194^2~6 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=457b1d5a4b7b8c2b3b6bd032098da600c50dd6b2;p=linux-2.6-omap-h63xx.git mv643xx_eth: add support for chips without transmit bandwidth control Add support for mv643xx_eth versions that have no transmit bandwidth control registers at all, such as the ethernet block found in the Marvell 88F6183 ARM SoC. Signed-off-by: Lennert Buytenhek --- diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 6564be122ac..408827de7d3 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -271,9 +271,13 @@ struct mv643xx_eth_shared_private { */ unsigned int t_clk; int extended_rx_coal_limit; - int tx_bw_control_moved; + int tx_bw_control; }; +#define TX_BW_CONTROL_ABSENT 0 +#define TX_BW_CONTROL_OLD_LAYOUT 1 +#define TX_BW_CONTROL_NEW_LAYOUT 2 + /* per-port *****************************************************************/ struct mib_counters { @@ -938,14 +942,17 @@ static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst) if (bucket_size > 65535) bucket_size = 65535; - if (mp->shared->tx_bw_control_moved) { - wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate); - wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu); - wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size); - } else { + switch (mp->shared->tx_bw_control) { + case TX_BW_CONTROL_OLD_LAYOUT: wrl(mp, TX_BW_RATE(mp->port_num), token_rate); wrl(mp, TX_BW_MTU(mp->port_num), mtu); wrl(mp, TX_BW_BURST(mp->port_num), bucket_size); + break; + case TX_BW_CONTROL_NEW_LAYOUT: + wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate); + wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu); + wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size); + break; } } @@ -977,14 +984,21 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq) /* * Turn on fixed priority mode. */ - if (mp->shared->tx_bw_control_moved) - off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num); - else + off = 0; + switch (mp->shared->tx_bw_control) { + case TX_BW_CONTROL_OLD_LAYOUT: off = TXQ_FIX_PRIO_CONF(mp->port_num); + break; + case TX_BW_CONTROL_NEW_LAYOUT: + off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num); + break; + } - val = rdl(mp, off); - val |= 1 << txq->index; - wrl(mp, off, val); + if (off) { + val = rdl(mp, off); + val |= 1 << txq->index; + wrl(mp, off, val); + } } static void txq_set_wrr(struct tx_queue *txq, int weight) @@ -996,23 +1010,30 @@ static void txq_set_wrr(struct tx_queue *txq, int weight) /* * Turn off fixed priority mode. */ - if (mp->shared->tx_bw_control_moved) - off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num); - else + off = 0; + switch (mp->shared->tx_bw_control) { + case TX_BW_CONTROL_OLD_LAYOUT: off = TXQ_FIX_PRIO_CONF(mp->port_num); + break; + case TX_BW_CONTROL_NEW_LAYOUT: + off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num); + break; + } - val = rdl(mp, off); - val &= ~(1 << txq->index); - wrl(mp, off, val); + if (off) { + val = rdl(mp, off); + val &= ~(1 << txq->index); + wrl(mp, off, val); - /* - * Configure WRR weight for this queue. - */ - off = TXQ_BW_WRR_CONF(mp->port_num, txq->index); + /* + * Configure WRR weight for this queue. + */ + off = TXQ_BW_WRR_CONF(mp->port_num, txq->index); - val = rdl(mp, off); - val = (val & ~0xff) | (weight & 0xff); - wrl(mp, off, val); + val = rdl(mp, off); + val = (val & ~0xff) | (weight & 0xff); + wrl(mp, off, val); + } } @@ -2288,14 +2309,20 @@ static void infer_hw_params(struct mv643xx_eth_shared_private *msp) msp->extended_rx_coal_limit = 0; /* - * Check whether the TX rate control registers are in the - * old or the new place. + * Check whether the MAC supports TX rate control, and if + * yes, whether its associated registers are in the old or + * the new place. */ writel(1, msp->base + TX_BW_MTU_MOVED(0)); - if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1) - msp->tx_bw_control_moved = 1; - else - msp->tx_bw_control_moved = 0; + if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1) { + msp->tx_bw_control = TX_BW_CONTROL_NEW_LAYOUT; + } else { + writel(7, msp->base + TX_BW_RATE(0)); + if (readl(msp->base + TX_BW_RATE(0)) & 7) + msp->tx_bw_control = TX_BW_CONTROL_OLD_LAYOUT; + else + msp->tx_bw_control = TX_BW_CONTROL_ABSENT; + } } static int mv643xx_eth_shared_probe(struct platform_device *pdev)