From: Ingo Molnar Date: Wed, 2 May 2007 17:27:04 +0000 (+0200) Subject: [PATCH] x86-64: remove clustered APIC mode X-Git-Tag: v2.6.22-rc1~1011^2~223 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=424df390101f9dfe015f0633aaec696c159b37a8;p=linux-2.6-omap-h63xx.git [PATCH] x86-64: remove clustered APIC mode Remove now unused clustered APIC mode code. Signed-off-by: Ingo Molnar Signed-off-by: Andi Kleen Cc: Suresh Siddha Cc: Andi Kleen Cc: "Li, Shaohua" Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton --- diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index bb47e86f3d0..6879b4f01e8 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -21,8 +21,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o tsc_sync.o obj-y += apic.o nmi.o -obj-y += io_apic.o mpparse.o \ - genapic.o genapic_cluster.o genapic_flat.o +obj-y += io_apic.o mpparse.o genapic.o genapic_flat.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += suspend.o diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c deleted file mode 100644 index 73d76308b95..00000000000 --- a/arch/x86_64/kernel/genapic_cluster.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright 2004 James Cleverdon, IBM. - * Subject to the GNU Public License, v.2 - * - * Clustered APIC subarch code. Up to 255 CPUs, physical delivery. - * (A more realistic maximum is around 230 CPUs.) - * - * Hacked for x86-64 by James Cleverdon from i386 architecture code by - * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and - * James Cleverdon. - */ -#include -#include -#include -#include -#include -#include -#include -#include - - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static void cluster_init_apic_ldr(void) -{ - unsigned long val, id; - long i, count; - u8 lid; - u8 my_id = hard_smp_processor_id(); - u8 my_cluster = APIC_CLUSTER(my_id); - - /* Create logical APIC IDs by counting CPUs already in cluster. */ - for (count = 0, i = NR_CPUS; --i >= 0; ) { - lid = x86_cpu_to_log_apicid[i]; - if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) - ++count; - } - /* - * We only have a 4 wide bitmap in cluster mode. There's no way - * to get above 60 CPUs and still give each one it's own bit. - * But, we're using physical IRQ delivery, so we don't care. - * Use bit 3 for the 4th through Nth CPU in each cluster. - */ - if (count >= XAPIC_DEST_CPUS_SHIFT) - count = 3; - id = my_cluster | (1UL << count); - x86_cpu_to_log_apicid[smp_processor_id()] = id; - apic_write(APIC_DFR, APIC_DFR_CLUSTER); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ - -static cpumask_t cluster_target_cpus(void) -{ - return cpumask_of_cpu(0); -} - -static cpumask_t cluster_vector_allocation_domain(int cpu) -{ - cpumask_t domain = CPU_MASK_NONE; - cpu_set(cpu, domain); - return domain; -} - -static void cluster_send_IPI_mask(cpumask_t mask, int vector) -{ - send_IPI_mask_sequence(mask, vector); -} - -static void cluster_send_IPI_allbutself(int vector) -{ - cpumask_t mask = cpu_online_map; - - cpu_clear(smp_processor_id(), mask); - - if (!cpus_empty(mask)) - cluster_send_IPI_mask(mask, vector); -} - -static void cluster_send_IPI_all(int vector) -{ - cluster_send_IPI_mask(cpu_online_map, vector); -} - -static int cluster_apic_id_registered(void) -{ - return 1; -} - -static unsigned int cluster_cpu_mask_to_apicid(cpumask_t cpumask) -{ - int cpu; - - /* - * We're using fixed IRQ delivery, can only return one phys APIC ID. - * May as well be the first. - */ - cpu = first_cpu(cpumask); - if ((unsigned)cpu < NR_CPUS) - return x86_cpu_to_apicid[cpu]; - else - return BAD_APICID; -} - -/* cpuid returns the value latched in the HW at reset, not the APIC ID - * register's value. For any box whose BIOS changes APIC IDs, like - * clustered APIC systems, we must use hard_smp_processor_id. - * - * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. - */ -static unsigned int phys_pkg_id(int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -struct genapic apic_cluster = { - .name = "clustered", - .int_delivery_mode = dest_Fixed, - .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .target_cpus = cluster_target_cpus, - .vector_allocation_domain = cluster_vector_allocation_domain, - .apic_id_registered = cluster_apic_id_registered, - .init_apic_ldr = cluster_init_apic_ldr, - .send_IPI_all = cluster_send_IPI_all, - .send_IPI_allbutself = cluster_send_IPI_allbutself, - .send_IPI_mask = cluster_send_IPI_mask, - .cpu_mask_to_apicid = cluster_cpu_mask_to_apicid, - .phys_pkg_id = phys_pkg_id, -};